Finally received my plow, I ordered it 12/26. Now I just need it to snow 8+ inches so I can have some fun!
7' wide, 18'' tall, 114 lbs.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Got Plow? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=6&t=28600 |
Page 1 of 2 |
| Author: | COKJ06 [ Tue Jan 15, 2008 10:25 pm ] |
| Post subject: | Got Plow? |
Finally received my plow, I ordered it 12/26. Now I just need it to snow 8+ inches so I can have some fun! 7' wide, 18'' tall, 114 lbs.
|
|
| Author: | Jeepjeepster [ Tue Jan 15, 2008 10:36 pm ] |
| Post subject: | |
Thats pretty sweet looking! Whats that black piece along the bottom made of? It looks like the part that goes into the hitch would snap off before it would do any damage to the frame, which is probably a good thing. I know you wont be doing and HD plowing on main roads, but it always amazed me that those blade/trucks hold up like they do. When they hit big pot holes under the snow Idk why it doesnt just break that thing off. I guess it will if you hit a bump thats big enough. |
|
| Author: | COKJ06 [ Tue Jan 15, 2008 11:01 pm ] |
| Post subject: | |
The piece that goes in the receiver, including the diagonal piece and plate is solid steal. Very beefy, so it's never going to break. The main cross member and the 2 uprights are 1/4 tubing. They are much weaker and connected by only 2 bolts. So I am hoping that something within that framework would break or bend before doing any damage to my Jeep. The bottom of the blade is a 4'' by 1'' piece of rubber, so it has some pothole/curb protection. I realize it is a light duty plow, and plan to use it as such. But I'm still looking forward to pushing some deep fresh snow with it. |
|
| Author: | Diggerfreek [ Wed Jan 16, 2008 12:18 am ] |
| Post subject: | |
the snow is a comming!!!!!! |
|
| Author: | Boostedxt [ Wed Jan 16, 2008 1:21 am ] |
| Post subject: | |
yeah wait till tonight..its gonna snow. come to my place and plow for me. actually dont , I like driving through it all. joe |
|
| Author: | Jase3gt [ Wed Jan 16, 2008 1:28 am ] |
| Post subject: | |
Which model did you get? How much did it set you back if you don't mind me asking? My back still hurts from shoveling out the end of the driveway from the city plows on Monday. |
|
| Author: | itsajeepthing [ Wed Jan 16, 2008 8:53 am ] |
| Post subject: | |
if you get some snow, please have someone snapping a few shots while you are pushing the snow around. Gotta see this in action! Really looks great! |
|
| Author: | meh_kick [ Wed Jan 16, 2008 9:03 am ] |
| Post subject: | |
Jeepjeepster wrote: ...but it always amazed me that those blade/trucks hold up like they do. When they hit big pot holes under the snow Idk why it doesnt just break that thing off. I guess it will if you hit a bump thats big enough.
Typically, the blade is not a solid wing. Rather it has hardened steel lower blades (maybe 8 or 10" tall and 1" thick) that are mounted on hinge backed with a heavy spring. When in normal operation, the lower blade pushes snow but when caught on a curb, pothole etc. it will "break away" and allow the entire plow to hop over the obstruction. I've hit bridge joints that made the plow hop as high as the windsheild in the State's dump trucks before. It only takes one time to learn that lesson. |
|
| Author: | COKJ06 [ Wed Jan 16, 2008 12:23 pm ] |
| Post subject: | |
Jase3gt wrote: Which model did you get? How much did it set you back if you don't mind me asking?
My back still hurts from shoveling out the end of the driveway from the city plows on Monday. It is the Snowsport 180, and it's cost was $1000. A bit pricey, but well under the $3000 other plows cost. Plus it is much lighter and can be totally removed in under a minute. And mounts only with the front hitch, so it does not effect ground clearance like normal mounting systems. I have appox. 300ft of drive that needs to be cleared, so it will be much faster than a snowblower. Come on snow! |
|
| Author: | KJ04 [ Wed Jan 16, 2008 12:53 pm ] |
| Post subject: | |
Did you have to install a front tow hitch for it to mount? |
|
| Author: | COKJ06 [ Wed Jan 16, 2008 1:31 pm ] |
| Post subject: | |
I did have to install a front receiver hitch, purchased separately for $150. Also my hitch is a special drop design (Landy Original) which is good because your receiver is supposed to be 16'' or less from the ground. That is an issue if you are lifted. I think a stock KJ would be OK though.. 
|
|
| Author: | Landy [ Wed Jan 16, 2008 1:49 pm ] |
| Post subject: | |
We don't get much snow here in the Willamette Valley, but I got to get me a plow now. That looks so cool! Can I be a mall snow plower? |
|
| Author: | KJKev [ Wed Jan 16, 2008 2:49 pm ] |
| Post subject: | Re: Got Plow? |
[quote="COKJ06"]Finally received my plow, I ordered it 12/26. Now I just need it to snow 8+ inches so I can have some fun! Does the plow angle to the side to allow the snow to 'run off'? Or do you have to turn the whole rig to one side? If not, I would think all you would be doing is making a huge pile to push. Looks great though. KJKev |
|
| Author: | COKJ06 [ Wed Jan 16, 2008 4:06 pm ] |
| Post subject: | |
It does not angle. They do offer a piece that would make it angle, used on their heavy duty blade. From my experience, once the blade fills with snow it will form a mound in the middle and will start spilling out the sides. Therefore creating almost a V-Blade result. I have pushed a lot of snow with an old tractor, but never with a Jeep. If I do have issues, I will have to buy the 'actuator' piece so I can better control the spillage. I will definitely report back after I use it a few times. |
|
| Author: | jeepkj02 [ Wed Jan 16, 2008 5:39 pm ] |
| Post subject: | |
Wanna come plow my driveway! 
Say goodbye to that rustless underbody! WoW!! |
|
| Author: | psukydd [ Wed Jan 16, 2008 7:38 pm ] |
| Post subject: | |
That looks like a sweet plow! We have always had them on 4x4 quads but this looks like it would work really well. Does it manually lower using those pins on each side or does it have a different way I'm not seeing. |
|
| Author: | COKJ06 [ Wed Jan 16, 2008 9:29 pm ] |
| Post subject: | |
Yep, it's all manual. Looking at quad blades is actually what got me started. A guy has a lot of time to think while shoveling, and I wondered if I could use a quad set up and adapt it to my Jeep. I wanted to stay as light as possible. Started looking online and found the Snowsport. Seemed to fit the bill. It has its limitations, but I think this 4000 lb diesel will push it, and a bunch of snow, quite well. |
|
| Author: | CD [ Wed Jan 16, 2008 10:23 pm ] |
| Post subject: | |
How good's that, a snow plow for the KJ. Have you got any shot's of yourself pushing snow? |
|
| Author: | stick [ Thu Jan 17, 2008 8:44 am ] |
| Post subject: | |
Still waiting on pics of this thing in action!
|
|
| Author: | COKJ06 [ Sun Jan 20, 2008 4:44 pm ] |
| Post subject: | |
Here are a couple pics of my CRD pushing snow. This is about 12 inches of snow! It did great! 
http://s259.photobucket.com/albums/hh31 ... 28_MVI.flv |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|