It is currently Tue Aug 04, 2026 6:16 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 32 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Got Plow?
PostPosted: Tue Jan 15, 2008 10:25 pm 
Offline
LOST Newbie
User avatar

Joined: Fri Oct 12, 2007 11:13 am
Posts: 28
Location: Denver, Colorado
Finally received my plow, I ordered it 12/26. Now I just need it to snow 8+ inches so I can have some fun!

7' wide, 18'' tall, 114 lbs.

Image

Image

Image

_________________
2006 CRD Sport | Frankenlifted | Skid Row Engine Skid | Front Hitch | 31 x 10.5 MT/Rs


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jan 15, 2008 10:36 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Mon Jul 11, 2005 1:03 pm
Posts: 8052
Location: Kentuckeeee
Thats pretty sweet looking!

Whats that black piece along the bottom made of? It looks like the part that goes into the hitch would snap off before it would do any damage to the frame, which is probably a good thing.

I know you wont be doing and HD plowing on main roads, but it always amazed me that those blade/trucks hold up like they do. When they hit big pot holes under the snow Idk why it doesnt just break that thing off. I guess it will if you hit a bump thats big enough.

_________________
LOST KJ'S
Where are you going???
Current Jeep: 2004 Jeep Liberty
-Atlantic Blue
-Air Ride Rear Suspension ; OME/Rustys Lift ; Powertrax Locker ; Moog Lower Ball-Joints ; 245/70/16 Yokohama Geolander A/T-S's on MOABS ; Flowmaster 50 SUV
Lost #007082
http://www.cardomain.com/id/jeepjeepster


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jan 15, 2008 11:01 pm 
Offline
LOST Newbie
User avatar

Joined: Fri Oct 12, 2007 11:13 am
Posts: 28
Location: Denver, Colorado
The piece that goes in the receiver, including the diagonal piece and plate is solid steal. Very beefy, so it's never going to break.

The main cross member and the 2 uprights are 1/4 tubing. They are much weaker and connected by only 2 bolts. So I am hoping that something within that framework would break or bend before doing any damage to my Jeep.

The bottom of the blade is a 4'' by 1'' piece of rubber, so it has some pothole/curb protection.

I realize it is a light duty plow, and plan to use it as such. But I'm still looking forward to pushing some deep fresh snow with it.

_________________
2006 CRD Sport | Frankenlifted | Skid Row Engine Skid | Front Hitch | 31 x 10.5 MT/Rs


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jan 16, 2008 12:18 am 
Offline
LOST Addict
User avatar

Joined: Thu Sep 13, 2007 1:28 am
Posts: 10686
Location: Some where in Colorado
the snow is a comming!!!!!!

_________________
2008 KK Liberty Sport NIGHT OPS EDITION + GILLS
OEM & Custom Skids - Factory Tow Package - Rock Lizard Skink Super Sliders
Prototype JBA 4 Inch Lift - JBA UCA's - Flowmaster Super 44 OR - Whacked Resonator
Jet Stage 2 - RL Gecko Basket Rack - Custom Winch Bumper - Recon 10.5K Winch
Image


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jan 16, 2008 1:21 am 
Offline
LOST Member
User avatar

Joined: Thu Sep 29, 2005 8:58 pm
Posts: 348
yeah wait till tonight..its gonna snow. come to my place and plow for me. actually dont , I like driving through it all.

joe


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jan 16, 2008 1:28 am 
Offline
Lifetime Member
Lifetime Member

Joined: Sat May 12, 2007 11:04 am
Posts: 150
Location: Londonderry, NH
Which model did you get? How much did it set you back if you don't mind me asking?
My back still hurts from shoveling out the end of the driveway from the city plows on Monday.

_________________
____________________________
Jason

2003 Red Wrangler Freedom Edition

2009 Black Grand Cherokee Rocky Mountain Edition


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jan 16, 2008 8:53 am 
Offline
LOST Member
User avatar

Joined: Sat Jul 09, 2005 1:30 pm
Posts: 243
Location: Milton Ontario. Canada
if you get some snow, please have someone snapping a few shots while you are pushing the snow around. Gotta see this in action! Really looks great!

_________________
Steve


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jan 16, 2008 9:03 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Wed May 24, 2006 12:32 pm
Posts: 885
Location: Cincinnati-ish, Ohio
Jeepjeepster wrote:
...but it always amazed me that those blade/trucks hold up like they do. When they hit big pot holes under the snow Idk why it doesnt just break that thing off. I guess it will if you hit a bump thats big enough.


Typically, the blade is not a solid wing. Rather it has hardened steel lower blades (maybe 8 or 10" tall and 1" thick) that are mounted on hinge backed with a heavy spring. When in normal operation, the lower blade pushes snow but when caught on a curb, pothole etc. it will "break away" and allow the entire plow to hop over the obstruction.

I've hit bridge joints that made the plow hop as high as the windsheild in the State's dump trucks before. It only takes one time to learn that lesson.

_________________
'04 Renegade 4x4
L.O.S.T. #058466
Car Domain, Updated: 2/23/2009
===_oooo
(_l_|_,\____\,_
{----__---_(olllllllo)
()_)"""""()_)--"--)_)


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jan 16, 2008 12:23 pm 
Offline
LOST Newbie
User avatar

Joined: Fri Oct 12, 2007 11:13 am
Posts: 28
Location: Denver, Colorado
Jase3gt wrote:
Which model did you get? How much did it set you back if you don't mind me asking?
My back still hurts from shoveling out the end of the driveway from the city plows on Monday.


It is the Snowsport 180, and it's cost was $1000. A bit pricey, but well under the $3000 other plows cost. Plus it is much lighter and can be totally removed in under a minute. And mounts only with the front hitch, so it does not effect ground clearance like normal mounting systems.

I have appox. 300ft of drive that needs to be cleared, so it will be much faster than a snowblower.

Come on snow!

_________________
2006 CRD Sport | Frankenlifted | Skid Row Engine Skid | Front Hitch | 31 x 10.5 MT/Rs


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jan 16, 2008 12:53 pm 
Offline
LOST Addict
User avatar

Joined: Thu Jul 07, 2005 8:25 pm
Posts: 1361
Location: Grafton, Ohio
Did you have to install a front tow hitch for it to mount?

_________________
Slightly modified Lt. Khaki 3.7 2004 LTD 4X4. Purchased new 8/6/03.
What I don't have....A Mag light mounted to my seat.
Original Old L.O.S.T. #000354

Nick's Pics & Mods click here: http://www.cardomain.com/ride/531173
http://www.survivaltopics.com/forums/


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jan 16, 2008 1:31 pm 
Offline
LOST Newbie
User avatar

Joined: Fri Oct 12, 2007 11:13 am
Posts: 28
Location: Denver, Colorado
I did have to install a front receiver hitch, purchased separately for $150. Also my hitch is a special drop design (Landy Original) which is good because your receiver is supposed to be 16'' or less from the ground. That is an issue if you are lifted. I think a stock KJ would be OK though..

Image

_________________
2006 CRD Sport | Frankenlifted | Skid Row Engine Skid | Front Hitch | 31 x 10.5 MT/Rs


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jan 16, 2008 1:49 pm 
Offline
LOST Member

Joined: Sun Aug 12, 2007 7:05 pm
Posts: 209
Location: Oregon
We don't get much snow here in the Willamette Valley, but I got to get me a plow now. That looks so cool! Can I be a mall snow plower?


Top
 Profile  
 
 Post subject: Re: Got Plow?
PostPosted: Wed Jan 16, 2008 2:49 pm 
Offline
LOST Member
User avatar

Joined: Sun Jul 24, 2005 11:38 am
Posts: 227
Location: Jacksonville, Illinois
[quote="COKJ06"]Finally received my plow, I ordered it 12/26. Now I just need it to snow 8+ inches so I can have some fun!

Does the plow angle to the side to allow the snow to 'run off'? Or do you have to turn the whole rig to one side?

If not, I would think all you would be doing is making a huge pile to push.

Looks great though.

KJKev


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jan 16, 2008 4:06 pm 
Offline
LOST Newbie
User avatar

Joined: Fri Oct 12, 2007 11:13 am
Posts: 28
Location: Denver, Colorado
It does not angle. They do offer a piece that would make it angle, used on their heavy duty blade.

From my experience, once the blade fills with snow it will form a mound in the middle and will start spilling out the sides. Therefore creating almost a V-Blade result. I have pushed a lot of snow with an old tractor, but never with a Jeep.

If I do have issues, I will have to buy the 'actuator' piece so I can better control the spillage.

I will definitely report back after I use it a few times.

_________________
2006 CRD Sport | Frankenlifted | Skid Row Engine Skid | Front Hitch | 31 x 10.5 MT/Rs


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jan 16, 2008 5:39 pm 
Offline
LOST Addict
User avatar

Joined: Thu Jul 07, 2005 2:11 pm
Posts: 1885
Location: Grand Rapids, MI
Wanna come plow my driveway! :D

Say goodbye to that rustless underbody! WoW!!

_________________
2002 Jeep KJ Sport 3.7L 4x4

245/75-16 Mastercraft Courser HSX, 16x7 Cragar, 2" OME MD Lift, ARB Bumper
AEM Brute Force Cold Air Intake, Flowmaster Super 44 Muffler

Currently working on: Full service on transmission & bed-lining ARB bumper

viewtopic.php?f=43&t=84650


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jan 16, 2008 7:38 pm 
Offline
LOST Newbie
User avatar

Joined: Tue Nov 13, 2007 12:19 am
Posts: 16
Location: Seneca Falls, NY
That looks like a sweet plow! We have always had them on 4x4 quads but this looks like it would work really well. Does it manually lower using those pins on each side or does it have a different way I'm not seeing.


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jan 16, 2008 9:29 pm 
Offline
LOST Newbie
User avatar

Joined: Fri Oct 12, 2007 11:13 am
Posts: 28
Location: Denver, Colorado
Yep, it's all manual. Looking at quad blades is actually what got me started. A guy has a lot of time to think while shoveling, and I wondered if I could use a quad set up and adapt it to my Jeep. I wanted to stay as light as possible. Started looking online and found the Snowsport. Seemed to fit the bill.

It has its limitations, but I think this 4000 lb diesel will push it, and a bunch of snow, quite well.

_________________
2006 CRD Sport | Frankenlifted | Skid Row Engine Skid | Front Hitch | 31 x 10.5 MT/Rs


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jan 16, 2008 10:23 pm 
Offline
LOST Addict
User avatar

Joined: Tue Oct 17, 2006 11:28 pm
Posts: 1984
Location: Sydney
How good's that, a snow plow for the KJ. Have you got any shot's of yourself pushing snow?

_________________
Member No: 152595
Susky Bro V The Highlander Terminator, got it Wuggs

Lifted by CRDSTU
265/70/16 STT's on 16x8 Chrome Soft 8's
CDKJ


Top
 Profile  
 
 Post subject:
PostPosted: Thu Jan 17, 2008 8:44 am 
Offline
LOST Member
User avatar

Joined: Thu Aug 09, 2007 1:44 pm
Posts: 176
Location: Lock Haven, PA
Still waiting on pics of this thing in action! :D

_________________
The Jeep Family:
2003 KJ Renegade - wife's daily driver
2001 WJ Limited - sister's daily driver
1997 XJ Sport - my daily driver
1995 YJ - the trail rig
1979 CJ5 - dad's toy
1966 M416 - the jeep trailer
1948 CJ2A Willys - my new project


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jan 20, 2008 4:44 pm 
Offline
LOST Newbie
User avatar

Joined: Fri Oct 12, 2007 11:13 am
Posts: 28
Location: Denver, Colorado
Here are a couple pics of my CRD pushing snow. This is about 12 inches of snow! It did great!

Image

Image

http://s259.photobucket.com/albums/hh31 ... 28_MVI.flv

_________________
2006 CRD Sport | Frankenlifted | Skid Row Engine Skid | Front Hitch | 31 x 10.5 MT/Rs


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 32 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com