after i left the garage the tow truck guy droped off a juck car...no engine alot of body damage even before i had my fun...
this is still for sale....just kidding...were scaping it...i thought it was cool because i don't have lockers...
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| just for fun!!! http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=6&t=29502 |
Page 1 of 1 |
| Author: | ohv_kj [ Thu Feb 14, 2008 7:05 pm ] |
| Post subject: | just for fun!!! |
after i left the garage the tow truck guy droped off a juck car...no engine alot of body damage even before i had my fun...
this is still for sale....just kidding...were scaping it...i thought it was cool because i don't have lockers... |
|
| Author: | jsc7002 [ Thu Feb 14, 2008 7:10 pm ] |
| Post subject: | |
haha thats pretty cool, and all the wheels are still touching! |
|
| Author: | gmctd [ Thu Feb 14, 2008 7:36 pm ] |
| Post subject: | |
Man, I dearly hope that's not a Mitsu 3000GT-VR................. |
|
| Author: | jsc7002 [ Thu Feb 14, 2008 7:49 pm ] |
| Post subject: | |
no thats not a GT its an Eclipse |
|
| Author: | ohv_kj [ Thu Feb 14, 2008 11:12 pm ] |
| Post subject: | |
yeah just a simple eclips...someone told me that the pics have a WWII feel to it..."'Liberty' all over a Japanesse car" |
|
| Author: | 03CDKJ [ Thu Feb 14, 2008 11:57 pm ] |
| Post subject: | |
 Awesome! Very cool 
|
|
| Author: | dloc_jeep_KJ [ Fri Feb 15, 2008 12:54 am ] |
| Post subject: | |
very nice!!! wish i could have played too 
|
|
| Author: | hyedipin [ Fri Feb 15, 2008 11:39 am ] |
| Post subject: | |
We had an abondoned car on the street for about 2-3 months.. I always told my wife, I will climb over that sucker one night, but chickened out since it was on the street, and I could get the blame for the damage that was already done on it.. |
|
| Author: | 2006 KJ [ Fri Feb 15, 2008 11:57 am ] |
| Post subject: | |
i'm always tempted to do this to any mazda miata i see on the street. especially when you pull behind a really really small car and can barely see their roof past your hood.. that's really tempting.. haha really cool pictures.. how is the rubbing with the 265/75's in the back.. do yours hit the fender flare inside by the rear door?? |
|
| Author: | ohv_kj [ Fri Feb 15, 2008 12:46 pm ] |
| Post subject: | |
2006 KJ wrote: i'm always tempted to do this to any mazda miata i see on the street. especially when you pull behind a really really small car and can barely see their roof past your hood.. that's really tempting.. haha really cool pictures.. how is the rubbing with the 265/75's in the back.. do yours hit the fender flare inside by the rear door??
i cut alot out and now have no rear rubbing at all...here are some pics that might show you how i cut them..i'm also using factory bump stops 
|
|
| Author: | 2006 KJ [ Fri Feb 15, 2008 2:38 pm ] |
| Post subject: | |
Question about the trimming. I looked into doing that but right under the plastic piece of fender flare (the one that wraps around the corner of the door).. is the metal door. Did you cut the door at all.. or just the plastic flare? Also is the seal still good on the door.. because the rubber seal goes right along the edge of the door. I've been going to do this for a long time.. just need some more info. |
|
| Author: | ohv_kj [ Fri Feb 15, 2008 2:57 pm ] |
| Post subject: | |
2006 KJ wrote: Question about the trimming. I looked into doing that but right under the plastic piece of fender flare (the one that wraps around the corner of the door).. is the metal door. Did you cut the door at all.. or just the plastic flare? Also is the seal still good on the door.. because the rubber seal goes right along the edge of the door. I've been going to do this for a long time.. just need some more info.
i grinded the metal a little and alot on the top...i left the door seal thier also got another seal to go where the door closes on to the raised foot pannel...i have had water and mud a quarter up the door and it stayed dry...the plastic insert i kept just cut half of it to protect the tire from the pinch weld in the wheel wel and to protect the fuel bay... |
|
| Author: | 2006 KJ [ Fri Feb 15, 2008 4:58 pm ] |
| Post subject: | |
thanks a lot!.. is there anyway you could snap me some detailed pictures of what you just explained? both the door and wheel well and seals. They would help a lot!.. but if your too busy or just dont feel like it thats fine to. thanks again |
|
| Author: | ohv_kj [ Fri Feb 15, 2008 7:09 pm ] |
| Post subject: | |
2006 KJ wrote: thanks a lot!.. is there anyway you could snap me some detailed pictures of what you just explained? both the door and wheel well and seals. They would help a lot!.. but if your too busy or just dont feel like it thats fine to. thanks again
sure no prob just give me a couple of days and i will send them to you! |
|
| Author: | Jjay [ Sun Feb 24, 2008 3:30 pm ] |
| Post subject: | |
Dude!!!!!!!! I always wanted to do that !! drive on another car. Between us, sometimes on highways I get cut off by a small low cars that I just imagine driving on top of it. |
|
| Author: | 2006 KJ [ Sun Feb 24, 2008 4:05 pm ] |
| Post subject: | |
ohv_kj wrote: 2006 KJ wrote: thanks a lot!.. is there anyway you could snap me some detailed pictures of what you just explained? both the door and wheel well and seals. They would help a lot!.. but if your too busy or just dont feel like it thats fine to. thanks again sure no prob just give me a couple of days and i will send them to you! thanks again... the rubbing problem in the back isn't bad.. but i'd sure love for it not to be there!! i think your the first person to do this mod to avoid that.. if someone else did i'm not aware of it... and again.. those pictures are sick! (of you running over the eclipse  )
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|