i used a piece of alum. that went from visor clip to visor clip with the ends bent down to match the headliner. drilled a hole in each end to
match the part of the clip that goes into the headliner. then i made a bracket for the cb and bolted it to the bar with some small bolts.
hope this helps. i'm not very good at telling how i did it just good at doing. anything can be built, it just depends on how much time you have
and how big a hammer ya got.

_________________
“Do not go where the path may lead, go instead where there is no path and leave a trail.”
- Waldo Emerson

looks easy enough to do,smart idea.i screw my cb to side near 4x4 shift.

_________________
2002 Cherokee 2.5 Crd Sport
ARB Bumper unit
Champion winche System
2'' Daystar lift kit
remapped ecu
Mopar light system
Samco Blue Hoses
Razer R20s filter
K&N Air filter system
Airflow snorkel system
builtin garmin system
bridgestone 245/70/16 All Terrains