LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

for those that asked about my cb install
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=6&t=32659
Page 1 of 1

Author:  jerseykj [ Mon May 19, 2008 8:36 pm ]
Post subject:  for those that asked about my cb install

i used a piece of alum. that went from visor clip to visor clip with the ends bent down to match the headliner. drilled a hole in each end to
match the part of the clip that goes into the headliner. then i made a bracket for the cb and bolted it to the bar with some small bolts.
hope this helps. i'm not very good at telling how i did it just good at doing. anything can be built, it just depends on how much time you have
and how big a hammer ya got.
Image
Image
Image
Image
Image
Image

Author:  kelticknight [ Mon May 19, 2008 11:38 pm ]
Post subject: 

looks easy enough to do,smart idea.i screw my cb to side near 4x4 shift.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/