LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

A.Z.S. Rocksteady Completed!!!!!!!!!!!
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=6&t=39761		 Page 1 of 2
Author:  KJ 119 [ Sat Jan 31, 2009 10:05 pm ]
Post subject:  A.Z.S. Rocksteady Completed!!!!!!!!!!!
Finally found time to put the bumper on.Got all the welding and bolting done.Tomorrow I cut up the old bumper
to finish it off a lil bit.
Image


No,I didn't name her Warn! :roll: She's Bobbi Jo.
Image
Author:  Inc [ Sat Jan 31, 2009 10:17 pm ]
Post subject: 
You buy this off AZScout?
Author:  KJ 119 [ Sat Jan 31, 2009 10:22 pm ]
Post subject: 
Inc wrote:
You buy this off AZScout?

Yup,was one tite fit.
Author:  Inc [ Sat Jan 31, 2009 10:23 pm ]
Post subject: 
I was soooo close to buying that. Nice bumper. Good buy too.
Author:  KJ 119 [ Sun Feb 01, 2009 9:17 pm ]
Post subject:  Day two
Day two over and this is the end result.
Image
Image

Still to come: Warn XD9000i
Black diamondplate inlay

Bub
Author:  ohv_kj [ Sun Feb 01, 2009 11:33 pm ]
Post subject: 
will look great once you get lifted...
Author:  2006 KJ [ Mon Feb 02, 2009 12:22 am ]
Post subject: 
sweet!
Author:  riptricket [ Mon Feb 02, 2009 12:56 am ]
Post subject: 
awesome looking!!!
Author:  shaggyislandboy [ Tue Feb 03, 2009 3:44 pm ]
Post subject: 
Nice! I like very much. CUte gurl too. She fits great on the bumper.
Lift party time!
Author:  SoDakJeep [ Tue Feb 03, 2009 5:20 pm ]
Post subject: 
I never really liked the tubed look do you plan to fill the gaps?
Author:  KJ 119 [ Tue Feb 03, 2009 6:41 pm ]
Post subject: 
SoDakJeep wrote:
I never really liked the tubed look do you plan to fill the gaps?


Yea,I have some black aluminum diamond plate to inlay.Also going to make a new air foil for the roof rack with the same stuff.

Bub
Author:  Inc [ Tue Feb 03, 2009 9:23 pm ]
Post subject: 
Good choice. I would have filled in the gaps myself. Once that is done you may have the best looking bumper on a KJ I have seen. Also I mounted my front turn signals without any of that original body/bumper that goes around them. I drilled out the inside screw hole to fit a thin allen head bolt and used a few washers to hold it in place and bolted it to the body. There is a rounded off square hole right below the headlights that works perfectly. I didn't like having that extra material hanging on there.
Author:  KJ 119 [ Sun Feb 08, 2009 8:49 pm ]
Post subject: 
Finished off the tuber this weekend with Warn Xd9000i and diamondplating.
Image
Image
Image
Image
Here's some closeups of diamondplating
Image
Image
Image


What's next you might ask????????????
Mardi Gras lift party!!!!!!!!!!!I'll get the beer and King cake :lol:
Image
Love my bumper.
Bub
Author:  03CDKJ [ Sun Feb 08, 2009 8:56 pm ]
Post subject: 
:lol: Standing on the hood!
That bumper is awesome by the way... Very cool... Nice mods...
Author:  htkrph [ Sun Feb 08, 2009 9:02 pm ]
Post subject: 
niiice, very nice bumper.
Author:  2006 KJ [ Sun Feb 08, 2009 11:49 pm ]
Post subject: 
that is an awesome set up! love seeing different things on the jeeps.. not just the cookie cutter arb :(. nice job with the diamond plate!
Author:  Inc [ Sun Feb 08, 2009 11:52 pm ]
Post subject: 
Awesome. Good job all around. Really nice to see a different setup.
Author:  riptricket [ Mon Feb 09, 2009 1:05 am ]
Post subject: 
I really like it!
Author:  Troysterr [ Mon Feb 09, 2009 1:22 am ]
Post subject: 
I thought it looked great on Dave's CRD...looks even better now. 8)
Author:  JeepinJarhead03 [ Mon Feb 09, 2009 1:37 am ]
Post subject: 
That black DPlate looks really nice, thats a very professional lookin rig
Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/