liberty picture updates!!

kjandy7 · **Joined:** Sat Feb 28, 2009 4:07 pm **Posts:** 80

side shot

custom roof rack lights + new Cobra CB

and custom mesh grill

let me know what you think!

tommudd · **Posted:** Wed Apr 15, 2009 5:25 pm

doesn't look too bad
under TO COME
think about the budget boost a little more, better to do it right the first time and have a better riding rig

kjandy7 · **Joined:** Sat Feb 28, 2009 4:07 pm **Posts:** 80

yeah, i'm still looking into a bunch of alternatives.

thanks though

treyz02kj · **Joined:** Thu Nov 20, 2008 12:49 pm **Posts:** 17

I want to know how you mounted the lights, Looks like a cheap solution, and a very clean install.

Your mesh seems to be turned at another angle from mine, stands out, and I've gotten a lot of attention since adding it. I'm sure you'll turn heads with those light mounted up so high too.

I like it man.

ramlebliberty · **Posted:** Wed Apr 15, 2009 8:15 pm

i see you are from jerzey... that sucks... defect and move to nc like the rest of the state is doing :lol:

kjandy7 · **Joined:** Sat Feb 28, 2009 4:07 pm **Posts:** 80

thanks!

just 2 clamp like things I found laying around at work. if you'd like I have a million at work I could send you.

and I think i'm going to stick around here in NJ for the cancer. :shock:

here is how I mounted my lights. I'd still like to hide the wires a little better.

riptricket · **Posted:** Wed Apr 15, 2009 11:34 pm

do you have a picture of the clamp itself... the ones you have from work?

Thanks!

kjandy7 · **Joined:** Sat Feb 28, 2009 4:07 pm **Posts:** 80

not at this time. i'll have to get some more from work tomorrow. but if you look at this circled part, it's just two of those. seperated.

and i would actually circle it but i just bought a macbook and haven't figured everything out yet. but they are two small L shaped pieces that i bolt to the rack and then just ran the wires to separate grounds.
also connected the two lights through the glove box, passed under the steering column, and up the door through the weather stripping.

ill post a nice picture of the clamps tomorrow night

WickedKJ · **Posted:** Thu Apr 16, 2009 4:35 pm

What did you use for the mesh grill? KJ looks good!

JeepinJarhead03 · **Posted:** Thu Apr 16, 2009 5:15 pm

Nice lookin jeep! I like how you've done your roof, looks good and very clean

kjandy7 · **Joined:** Sat Feb 28, 2009 4:07 pm **Posts:** 80

for my grill, I just went to home depot and bought concrete wire floor mesh for under concrete floors. For $8 I was able to buy a nice size piece that I was able to make 4 grill inserts. I am going to attempt to make one of them black.

should be interesting.

and thank you!

KJTommy · **Posted:** Fri Apr 17, 2009 9:16 am

Haha, another dirty Jerzian...nice jeep man, mine's the same color, just completely stock. I like the idea of the mess grill...

kjandy7 · **Joined:** Sat Feb 28, 2009 4:07 pm **Posts:** 80

thanks a lot!

jersey, the garden state of cancer. :shock:

WickedKJ · **Posted:** Sun Apr 19, 2009 8:46 am

Thanks for the tip on the grill I will check it out. All the materials I have looked at I just don't like the patterns when I see them. My plan as well is to paint it black. I know a few people have used the gutter screening but I havent found a pattern I like.

kjandy7 · **Joined:** Sat Feb 28, 2009 4:07 pm **Posts:** 80

so since yesterday was such a nice day out over her in NJ, I decided to clean the inside of my jeep, and go ahead with painting my mesh grille black.
I also blacked out my front turn signals and whole tail lights.

liberty picture updates!!

Who is online