Swampthings got taken back down to a more liveable height, due to problems may get a picture but most certainly not want to build one like it , well unless you want problems also
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| pic's of 4'' of higher non sfa kj's http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=6&t=41711 |
Page 1 of 1 |
| Author: | JeepBumm68 [ Mon Mar 30, 2009 6:54 pm ] |
| Post subject: | pic's of 4'' of higher non sfa kj's |
looking for pic's of 4'' or higher non sfa kj's. There is a greeen one i think that has a 5'' custom on here but can't remember the name. it looks good. |
|
| Author: | KJ kyle [ Mon Mar 30, 2009 7:05 pm ] |
| Post subject: | |
thats swmpthng. check JBAs website and they have the 4" and 6" |
|
| Author: | tjkj2002 [ Mon Mar 30, 2009 7:36 pm ] |
| Post subject: | Re: pic's of 4'' of higher non sfa kj's |
JeepBumm68 wrote: looking for pic's of 4'' or higher non sfa kj's. There is a greeen one i think that has a 5'' custom on here but can't remember the name. it looks good. That guy reduced his lift down to 3.5"-4" of lift due to many problems.
|
|
| Author: | tommudd [ Mon Mar 30, 2009 7:38 pm ] |
| Post subject: | |
Swampthings got taken back down to a more liveable height, due to problems may get a picture but most certainly not want to build one like it , well unless you want problems also
|
|
| Author: | KJ kyle [ Mon Mar 30, 2009 7:41 pm ] |
| Post subject: | |
thats too bad, it looked awesome |
|
| Author: | JeepBumm68 [ Mon Mar 30, 2009 7:50 pm ] |
| Post subject: | |
not really setup up like his but i want 4'' lift for the girls libby. Still not dead set on an SFA swap quite yet until i can convice her to see some of the CO libby's that are getting done down at RL's shop |
|
| Author: | KJ kyle [ Mon Mar 30, 2009 8:06 pm ] |
| Post subject: | |
JBA has the 6" lift... an SFA is an aweful lot of money to spend on a vehicle thats not yours  . most of them are tipping the scales at about $20k
|
|
| Author: | tjkj2002 [ Mon Mar 30, 2009 10:15 pm ] |
| Post subject: | |
KJ kyle wrote: JBA has the 6" lift... an SFA is an aweful lot of money to spend on a vehicle thats not yours Heck I got $20,000 in parts alone right now and still not done buying them all . most of them are tipping the scales at about $20k ,thank god labor will be free  .
|
|
| Author: | tommudd [ Mon Mar 30, 2009 10:31 pm ] |
| Post subject: | |
JeepBumm68 wrote: not really setup up like his but i want 4'' lift for the girls libby. Still not dead set on an SFA swap quite yet until i can convice her to see some of the CO libby's that are getting done down at RL's shop
Just do a Frankenlift or OME with some extras, you would be so close to a 4 inch it would not matter people get caught up too much in numbers when doing their lift, someone may put on a OME with nothing else and get 4 inches of lift ( due to where they started ) whereas someone else puts on a Frankenlift and gets the same |
|
| Author: | KJ kyle [ Mon Mar 30, 2009 10:32 pm ] |
| Post subject: | |
x2. thats gonna be the best bang for your buck |
|
| Author: | JeepBumm68 [ Tue Mar 31, 2009 2:21 am ] |
| Post subject: | |
i understand. really the only reason numbers matter to me atm is she has the CRD diesel, and here in colorado we do alot of snow, rock, and mud driving. Really only need the extra lift for the Rocks. Right now running 3.5'' with RK's lift. So i am really only looking for new coils or spacers to net maybe another .50 to 1'' lift for here. Cvs are great atm. only thing holding her up is those dang swaybar links. |
|
| Author: | riptricket [ Tue Mar 31, 2009 11:34 am ] |
| Post subject: | |
I know that 2006KJ has gotten almost 4" with his franky... And his looks awesome! |
|
| Author: | ramlebliberty [ Wed Apr 01, 2009 12:09 am ] |
| Post subject: | |
come to NC home of the 6k SFA
|
|
| Author: | tommudd [ Wed Apr 01, 2009 9:28 am ] |
| Post subject: | |
riptricket wrote: I know that 2006KJ has gotten almost 4" with his franky...
And his looks awesome! I have almost 4 inches ( or should say I sit within a 1/4 inch of what a JBA 4 inch lift does) with OMEs and extras don't need the Franky to get 4 inches |
|
| Author: | tommudd [ Wed Apr 01, 2009 9:29 am ] |
| Post subject: | |
ramlebliberty wrote: come to NC home of the 6k SFA
you really need to be in the vendor section as much as you advertise for that guy getting a good kickback are you?
|
|
| Author: | riptricket [ Wed Apr 01, 2009 11:38 am ] |
| Post subject: | |
with the franky and ome hd's, would I really need Al's A-arms? |
|
| Author: | 2006 KJ [ Wed Apr 01, 2009 12:22 pm ] |
| Post subject: | |
riptricket wrote: with the franky and ome hd's, would I really need Al's A-arms?
maybe sooner or later.. but i've had my frankenlift on for 20,000 miles and more than 2 years with no problems... still have the stock a-arms on it. |
|
| Author: | tommudd [ Wed Apr 01, 2009 12:45 pm ] |
| Post subject: | |
2006 KJ wrote: riptricket wrote: with the franky and ome hd's, would I really need Al's A-arms? maybe sooner or later.. but i've had my frankenlift on for 20,000 miles and more than 2 years with no problems... still have the stock a-arms on it. I ran mine lifted for 65,000 plus miles with stock arms and they were still good and tight when I took them off. Little easier to align now and can shoot grease in the ball joints but other than that.................. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|