LOST JEEPS :: View topic - White Tanks, AZ

LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/

White Tanks, AZ http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=6&t=48376	Page 1 of 1

Author:	eyehatetofu [ Thu Dec 10, 2009 4:22 am ]
Post subject:	White Tanks, AZ
Went out to the White Tank Mountains the other day with a LJ, TJ, JK, and a XJ. It was an interesting time (you'll see why below)! Had a rock press up the bead causing a loss of air. It managed to re-seat itself no problem, but was scary as he11 hearing a giant gush of air like that Here the tire is getting filled back up. Luckily the guy behind me had a Warn winch with an aircompresser built into it, it was friggin sweet. Then is when the fun started. The guy with the XJ had a minor mis-hap.

Author:	1996xj [ Thu Dec 10, 2009 10:01 am ]
Post subject:
Killer pic's, Poor XJ !!!!

Author:	Neatus [ Thu Dec 10, 2009 12:36 pm ]
Post subject:
Wow, looks like it was fun and not fun at the same time....

Author:	Inc [ Thu Dec 10, 2009 12:42 pm ]
Post subject:
Neatus wrote: Wow, looks like it was fun and not fun at the same time.... X2.

Author:	David Jr [ Thu Dec 10, 2009 7:06 pm ]
Post subject:
Please tell me he drove it strapped like that all the way home.

Author:	eyehatetofu [ Thu Dec 10, 2009 8:00 pm ]
Post subject:
David Jr wrote: Please tell me he drove it strapped like that all the way home. No, the strap was there to hold the axle from dropping down when the XJ was jacked up. It was an ordeal because we couldn't get down off the rock so the whole procedure was done at about a 45 degree angle. The guy had spares axle shafts with a new steering knuckle (I think what the stuff was called). He drove it off the trail then onto a trailer for the ride home. It was a fun day. I have never been witness to anything crazy like that. If that happened to me, I have no idea what I would of done The guy with the XJ laughed and got down to work.

Author:	JJsTJ [ Thu Dec 10, 2009 10:41 pm ]
Post subject:
Fun trail, cool area. i ran my XJ through their a few years back. Common problem on the XJ/TJ etc, break the u-joint and it all binds up forcing the ball joint to pop.

Author:	djui5 [ Fri Dec 11, 2009 2:29 am ]
Post subject:
I see you need some rocker panel armour Great pics I didn't see all those KJ pics on the other site. How was the FJ trip?

Author:	eyehatetofu [ Fri Dec 11, 2009 3:27 pm ]
Post subject:
djui5 wrote: I see you need some rocker panel armour I'm going to go see Doc from VJC this coming week! Plus they were all bent up from the CK run a couple months ago. I don't think I banged em up this time out, came pretty close but didn't hit them. djui5 wrote: Great pics I didn't see all those KJ pics on the other site. How was the FJ trip? FJ trip? I have never been out there. One of these days though I'll get out there. Someone said something about running Elvis

Author:	STINGN [ Fri Dec 11, 2009 3:41 pm ]
Post subject:
XJ ouchie!

Author:	cptnfois [ Fri Dec 11, 2009 9:17 pm ]
Post subject:	Nice pic's
If you don't mind me asking What kind of tires are those and how big and do you have a lift. sorry for all the questions but I think your liberty has a great stance thanks

Author:	eyehatetofu [ Fri Dec 11, 2009 9:22 pm ]
Post subject:	Re: Nice pic's
cptnfois wrote: If you don't mind me asking What kind of tires are those and how big and do you have a lift. sorry for all the questions but I think your liberty has a great stance thanks Why thank you kind sir. I have a daystar 2.5 inch spacer lift and am running 245/75/16 Goodyear MT/R's. The daystar lift seems to be pretty popular at first (because it is cheap) but it also seems like many replace with a better suspension lift after the stock struts and springs wear out. It came on there when I bought it. I'll be replacing with better components once they start to wear out.

Author:	djui5 [ Fri Dec 11, 2009 10:23 pm ]
Post subject:
eyehatetofu wrote: I'm going to go see Doc from VJC this coming week! Doc is the man. Look up "Inc" sliders on here. Have Doc do something similar. Mike (Inc) did a great job with his and they come out really flush with the sides. I have a set that hasn't been installed if you want them ($70). It's almost useless for me to install them now cuz mine are so bent up. They were bent for my KJ, and will still need the rectangle/square tube run to the "frame" rails. Quote: FJ trip? I have never been out there. One of these days though I'll get out there. Someone said something about running Elvis Whoops, thought I saw you at the flagpole last weekend, musta been another guy. Elvis=:evil: Have a look at mine and you'll know why I'll never run it again in the Liberty

Page 1 of 1	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/