$35 never looked so good.
Homelink is linked, everything works great. Now to buy a temp sensor.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| We have EVIC! http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=6&t=50496 |
Page 1 of 2 |
| Author: | Budke [ Wed Feb 24, 2010 1:41 pm ] |
| Post subject: | We have EVIC! |
$35 never looked so good. Homelink is linked, everything works great. Now to buy a temp sensor.
|
|
| Author: | JeepinJarhead03 [ Wed Feb 24, 2010 2:02 pm ] |
| Post subject: | Re: We have EVIC! |
is Open Circuit one of those special features? lol.... dude budke wtf.. you got an evic before i did? *cough* not that i was. like.. looking for one.. like.. yeah so where'd you get it. 
|
|
| Author: | Budke [ Wed Feb 24, 2010 2:17 pm ] |
| Post subject: | Re: We have EVIC! |
It says open circuit because I don't have a temp. sensor. I got it off a guy on jeepforum.com who was parting out a 01 WJ ltd. $35 for the evic and the WHOLE harness. 
|
|
| Author: | STINGN [ Wed Feb 24, 2010 2:37 pm ] |
| Post subject: | Re: We have EVIC! |
nice...is it on there tight or loose? I'm going to be doing this and a auto mirror soon 
|
|
| Author: | Budke [ Wed Feb 24, 2010 2:44 pm ] |
| Post subject: | Re: We have EVIC! |
Its on there nice and tight. I just have the get a screw so I can screw the back of it down so its closer to the roof line. But those tabs hold it in ice and tight. |
|
| Author: | JeepinJarhead03 [ Wed Feb 24, 2010 2:50 pm ] |
| Post subject: | Re: We have EVIC! |
This message has been automatically flagged and reported by the system for overly lewd innuendo comments in reference to the phrasing of the last posters message. |
|
| Author: | Budke [ Wed Feb 24, 2010 2:55 pm ] |
| Post subject: | Re: We have EVIC! |
JeepinJarhead03 wrote: This message has been automatically flagged and reported by the system for overly lewd innuendo comments in reference to the phrasing of the last posters message. Bahahahaha. Thanks for pointing that out. 
|
|
| Author: | STINGN [ Wed Feb 24, 2010 4:54 pm ] |
| Post subject: | Re: We have EVIC! |
so how did you wire it up and how did you splice it up? give us some input! |
|
| Author: | Budke [ Wed Feb 24, 2010 5:31 pm ] |
| Post subject: | Re: We have EVIC! |
Wrapped the whole harness in electrical tape, ran it under the headliner. Had to pull it down a little bit where it meets the windshield to get it up in there, then ran it down the a-pillar and under the dash. Spliced the wires into the correct wires by cutting about 1/2" out of each wire, put the wire from the evic in the middle of the OBD wire and wrapped it around the OBD wire. Then I wrapped up the splices with electrical tape. For the power wire I spliced it into the power wire on my headunit and viola, it was done!
|
|
| Author: | JeepinJarhead03 [ Wed Feb 24, 2010 5:38 pm ] |
| Post subject: | Re: We have EVIC! |
boy they aint pyrimid speakers hehe get some scotch blocks or some sauder or something lol |
|
| Author: | Budke [ Wed Feb 24, 2010 5:59 pm ] |
| Post subject: | Re: We have EVIC! |
scotch blocks? And I don't know how to solder nor do I have a soldering iron. I think my splicing job will do just fine.
|
|
| Author: | JeepinJarhead03 [ Wed Feb 24, 2010 6:01 pm ] |
| Post subject: | Re: We have EVIC! |
scotch blocks is a more secure way to splice, not as good as solder tho one side of the block is open to an uncut unstripped wire, the other side you press in the end of the wire you want included in the circuit pinch down the splice gate, wrap with tape and voila |
|
| Author: | Budke [ Wed Feb 24, 2010 6:20 pm ] |
| Post subject: | Re: We have EVIC! |
Well its too late now.
|
|
| Author: | JeepinJarhead03 [ Wed Feb 24, 2010 6:27 pm ] |
| Post subject: | Re: We have EVIC! |
not really it's just wrapped up with tape if it's like that at the M&G, it won't be for long, all that stuff goes with me wherever i go lol then you won't have to worry about vibration, wires that get pulled during other maintenence or installs, etc disconnecting your evic and shorting out your 35 dollar gem dawg |
|
| Author: | Budke [ Wed Feb 24, 2010 6:31 pm ] |
| Post subject: | Re: We have EVIC! |
Well I'll let you do that at the M&G. Cause its gonna be the same then as it is now. :p |
|
| Author: | JeepinJarhead03 [ Wed Feb 24, 2010 6:33 pm ] |
| Post subject: | Re: We have EVIC! |
well that's what M&G's are for
|
|
| Author: | Budke [ Wed Feb 24, 2010 6:35 pm ] |
| Post subject: | Re: We have EVIC! |
That and wheeling. And hot dogs and hamburgers! |
|
| Author: | STINGN [ Wed Feb 24, 2010 6:36 pm ] |
| Post subject: | Re: We have EVIC! |
hey take a picture of your splicing on the OBD |
|
| Author: | Budke [ Wed Feb 24, 2010 6:47 pm ] |
| Post subject: | Re: We have EVIC! |
too dark and too tired. I will tomorrow. except for the power wire. too much work to have to take my radio out again. |
|
| Author: | STINGN [ Wed Feb 24, 2010 6:54 pm ] |
| Post subject: | Re: We have EVIC! |
Budke wrote: too dark and too tired. I will tomorrow. except for the power wire. too much work to have to take my radio out again. your lazy...5 screws
|
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|