LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Install a ARB bumper
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=6&t=59893
Page 1 of 1

Author:  NCC-1864 [ Sat Apr 02, 2011 8:47 pm ]
Post subject:  Install a ARB bumper

Bought a ARB bumper, after I ran into a mini van 3 weeks ago.
decide to buy a ARB instead of sending the Jeep to the dealer and have a
brand new plastic front bumper.
Prior to the install ,I send it to my LINE X dealer.
Not cheap but great job.
Some problem cause ARB doesn't take to account the extra tickness of LINE X
so all the bolts are a bit short.
Took a day to install

Image




Image



just before it was send to LINE X

Image



no winch for now .
Lost 1/2 " in front with that bumper.

will get a JBA 2.5" lift next week

Like your suggestion ,move Hella 500 to it's proper place,
looks much better

Image


Here a picture of how i ran the cabling for my Hella 500
Image

Author:  tommudd [ Sat Apr 02, 2011 9:00 pm ]
Post subject:  Re: Install a ARB bumper moved to what did you do to jeep to

Ah, don't think its ARB fault, the bolts are long enough as provided, the installer did not take into account the extra thickness of the LineX :ROTFL:

Author:  NCC-1864 [ Sun Apr 03, 2011 1:32 pm ]
Post subject:  Re: Install a ARB bumper moved to what did you do to jeep to

Yeah well I know that that 's not ARB fault .I didn't put any accusations here.
All I was saying is bolts provides with the kit could be just a bit longer like a 5mm longer
to take account the
extra thickness of a LINE X or else .
But the install was easy.
Don't regret this acquisition at all

Author:  mapco [ Sun Apr 03, 2011 7:30 pm ]
Post subject:  Re: Install a ARB bumper moved to what did you do to jeep to

I don't understand why you mounted lights on the antenna tabs. Doesn't look good.

Author:  CoopaTroopa [ Sun Apr 03, 2011 10:39 pm ]
Post subject:  Re: Install a ARB bumper moved to what did you do to jeep to

I say if you mount lights there to flip them upside down... then they won't impair your line of sight.

Author:  gtommec [ Mon Apr 04, 2011 2:00 am ]
Post subject:  Re: Install a ARB bumper moved to what did you do to jeep to

CoopaTroopa wrote:
I say if you mount lights there to flip them upside down... then they won't impair your line of sight.


you can't mount them upside down, the bar interferes. I had a set of lights mounted on mine for a day and decided that I didn't like the way they looked there either.
Image

Author:  NCC-1864 [ Mon Apr 04, 2011 12:03 pm ]
Post subject:  Re: Install a ARB bumper moved to what did you do to jeep to

Yeah ,you're probably right ,
I will move them to where they suppose to be.
Thanks ,for your comments.
Marc

Author:  OldSkull [ Mon Apr 04, 2011 1:24 pm ]
Post subject:  Re: Install a ARB bumper moved to what did you do to jeep to

Where are the "cup" insert for the fog light in the bumper? You didn't install them or they forget to give you a pair of those? :roll:

PS: Now it's mini van hunting season! get them! :mrgreen:

Author:  Galarno [ Thu Apr 07, 2011 12:48 pm ]
Post subject:  Re: Install a ARB bumper moved to what did you do to jeep to

Nice bumper Marc,

It is almost as good as mine!!!!!!!!!1

Pour ce qui est de tes lumières, tu as vu comment elle sont sur mon Libby, j'ai mis mes Hella à l'envers, elle sont fixées à
la même place que tu les as mis avec un simple tuyau coupé, je te montrai ça.
Sinon tu peux les viser dans le bas du bumper, mais je trouvais que c'étais difficile d'accès.

Bon achat

Pour la suspension, c'est sur que le devant en mange un coup.
Je pense à ma suspension moi aussi
As tu acheté la tienne?

Author:  NCC-1864 [ Thu Apr 07, 2011 9:10 pm ]
Post subject:  Re: Install a ARB bumper moved to what did you do to jeep to

OldSkull wrote:
Where are the "cup" insert for the fog light in the bumper? You didn't install them or they forget to give you a pair of those? :roll:

PS: Now it's mini van hunting season! get them! :mrgreen:

i was in a hurry to take the picture before it was all done
Now the cups are in place.

No ARB supply everything,nothing was missing.

Author:  roccet [ Sun Apr 10, 2011 11:38 am ]
Post subject:  Re: Install a ARB bumper

what does the inside of the bumper look like???
I want to see where the bumper bolts up to.. etc..

Author:  OldSkull [ Sun Apr 10, 2011 12:35 pm ]
Post subject:  Re: Install a ARB bumper moved to what did you do to jeep to

NCC-1864 wrote:
OldSkull wrote:
Where are the "cup" insert for the fog light in the bumper? You didn't install them or they forget to give you a pair of those? :roll:

PS: Now it's mini van hunting season! get them! :mrgreen:

i was in a hurry to take the picture before it was all done
Now the cups are in place.

No ARB supply everything,nothing was missing.


Just get there ( ARB warehouse) this week to pick my OME Coil spring, ARB 16K lbs snatch strap and ARB inflator with gauge. I receive a T-shirt and Tony offer me another one for my girl friend with my other B/O order. Lot of interrest in ARB products they have shortage frequently worldwide.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/