LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Trimmed bumper makes a world of difference!
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=6&t=61541		 Page 1 of 2
Author:  iMTB [ Wed Jul 06, 2011 11:05 pm ]
Post subject:  Trimmed bumper makes a world of difference!
As some of you have seen, I recently sank my KJ in mud and messed stuff up. Most everything is back to normal now though. I'm still working on getting all the mud out. Today I realized I had about 10lbs of dry mud stuck in my front air dam. Started chiseling it out, then realized that the air dam itself looked bad. So I cut it off!

Before:
Image
Image

After:
Image
Image

I think it looks much better now. What do you guys think?
Author:  2006 KJ [ Wed Jul 06, 2011 11:36 pm ]
Post subject:  Re: Trimmed bumper makes a world of difference!
8)
Author:  jaarr76 [ Thu Jul 07, 2011 9:30 am ]
Post subject:  Re: Trimmed bumper makes a world of difference!
looks good. What did you use to cut it ?
Author:  At The Helm [ Thu Jul 07, 2011 11:36 am ]
Post subject:  Re: Trimmed bumper makes a world of difference!
Nice. Tempted to do something like this to my kk. Yesterday I was scared off from completing one if my local trails for fear of ripping off my bumpers. So this may be an economical solution. 8)
Author:  67Customs [ Thu Jul 07, 2011 11:46 am ]
Post subject:  Re: Trimmed bumper makes a world of difference!
That looks very good. Debating on whether or not to do that to mine.
Author:  iMTB [ Thu Jul 07, 2011 1:18 pm ]
Post subject:  Re: Trimmed bumper makes a world of difference!
Thanks for the kind words guys!

I cut it with a box cutter/utility knife. The bumper slices like butter. I wasn't sure if I wanted to do it at first, because I didn't know how I would reattach the wheel well liner. Turns out that Jeep wants us to cut the bumper! There an extra, used hole exactly at the point where I cut the liner. I simply drilled a hole in the liner and reused the plastic clip.

I'll take a picture of what I'm describing for people thinking about doing this.
Author:  iMTB [ Thu Jul 07, 2011 1:38 pm ]
Post subject:  Re: Trimmed bumper makes a world of difference!
Image
Image
Author:  blackwidowkj06 [ Thu Jul 07, 2011 7:02 pm ]
Post subject:  Re: Trimmed bumper makes a world of difference!
A trimmed front bumper does make a world of difference. Looks good though.
Author:  Fulltimer [ Fri Jul 08, 2011 4:15 am ]
Post subject:  Re: Trimmed bumper makes a world of difference!
Now all you have to do is lift it! It looks much better than stock.

Terry
Author:  iMTB [ Fri Jul 08, 2011 11:45 am ]
Post subject:  Re: Trimmed bumper makes a world of difference!
I just spent all my lift money repairing it. Over $1500 in repairs after I sunk it. Hopefully this fall I can put an OME lift on.
Author:  jaarr76 [ Tue Jul 12, 2011 5:13 pm ]
Post subject:  Re: Trimmed bumper makes a world of difference!
Got any side shots of the trimmed bumper?
Author:  iMTB [ Tue Jul 12, 2011 6:14 pm ]
Post subject:  Re: Trimmed bumper makes a world of difference!
jaarr76 wrote:
Got any side shots of the trimmed bumper?

I'll go take some.
Author:  iMTB [ Tue Jul 12, 2011 8:17 pm ]
Post subject:  Re: Trimmed bumper makes a world of difference!
Mall crawlin
Image

Side:
Image

Trails are flooded!
Image
Author:  LibertyGuy [ Sat Jul 16, 2011 9:33 am ]
Post subject:  Re: Trimmed bumper makes a world of difference!
Looks good! I was wondering...doesn't that air dam serve a purpose like helping cool down your engine while driving? I know on most cars you need those air dams or you'll start overheating much quicker. I owned 2 camaros and both had those air dams; mechanics all told me they're for helping keep your engine cooler while driving. Please correct me if I'm wrong when it comes to the Liberty.
Author:  iMTB [ Sat Jul 16, 2011 1:56 pm ]
Post subject:  Re: Trimmed bumper makes a world of difference!
Well, my jeep did have a bad overheating problem. Then I washed a couple pounds of mud out of the radiator and now my needle doesn't move. I live in Florida so it's hot everyday too. It might do something on some cars, but it seems fine on the Jeep.
Author:  tommudd [ Sat Jul 16, 2011 5:02 pm ]
Post subject:  Re: Trimmed bumper makes a world of difference!
Now comes the real test
you've cut the front, thats the easy one but do you have the B***s to cut the rear one :ROTFL:

As far as cooling think how many have cut their bumpers years ago plus the ones who have ARBs and no cooling issues.
Author:  iMTB [ Sat Jul 16, 2011 5:14 pm ]
Post subject:  Re: Trimmed bumper makes a world of difference!
tommudd wrote:
Now comes the real test
you've cut the front, thats the easy one but do you have the B***s to cut the rear one :ROTFL:

As far as cooling think how many have cut their bumpers years ago plus the ones who have ARBs and no cooling issues.


I'm not sure how much I like the rear cut. I've got a hitch on there that will just be totally uncovered. I decided that if the front looked terrible, I'd get an ARB. I wish I would have done this sooner though. My driver side turn signal is already cracked and the plastic clip on both sides by the signal is broken from coming down on the bumper.
Author:  tommudd [ Sat Jul 16, 2011 9:09 pm ]
Post subject:  Re: Trimmed bumper makes a world of difference!
KK hitches work great for that have 3 to 4 inches more clearance under the hitch/bumper that way plus no where for the mud to gather :wink:
Author:  long_tall_texan [ Sun Jul 17, 2011 12:18 am ]
Post subject:  Re: Trimmed bumper makes a world of difference!
iMTB wrote:
I'm not sure how much I like the rear cut. I've got a hitch on there that will just be totally uncovered. I decided that if the front looked terrible, I'd get an ARB. I wish I would have done this sooner though. My driver side turn signal is already cracked and the plastic clip on both sides by the signal is broken from coming down on the bumper.


I have a hitch and a trimmed rear bumper. Doesn't hang out there too much...
Image

Image
Author:  dgeist [ Tue Jul 19, 2011 12:58 pm ]
Post subject:  Re: Trimmed bumper makes a world of difference!
iMTB wrote:
Image

I think it looks much better now. What do you guys think?


I really like that profile tire on the Duratrac. It looks like it's about 1mm shorter than the 245/75R16. It's a little narrower though, so I'm curious if you have a lift and if you had to do any wheel-well trimming in the front to make them fit at full lock.

dan
Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/