| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| yj front d30.. SFA? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=73&t=38768 |
Page 1 of 1 |
| Author: | swmpthg [ Wed Dec 31, 2008 1:32 pm ] |
| Post subject: | yj front d30.. SFA? |
Okay, I have a front d30 from a 93 yj. Can i use this for my swap? As long as I take the existing brackets off and fab on new ones to work with my kj? also where can I find the Nth products? and which kit should I buy for a sfa setup? is it for a tj or lj? and what years will work with some fabing of course. thanks, wes |
|
| Author: | ohv_kj [ Wed Dec 31, 2008 1:34 pm ] |
| Post subject: | |
i hope it isnt a vacum disconect...a cherokee axle is the same as a yj w/ out the disconnect |
|
| Author: | swmpthg [ Wed Dec 31, 2008 1:54 pm ] |
| Post subject: | |
ohv_kj wrote: i hope it isnt a vacum disconect...a cherokee axle is the same as a yj w/ out the disconnect
It does have the vacum disconect. So basicly having this axle is worthless.. |
|
| Author: | JJsTJ [ Wed Dec 31, 2008 2:16 pm ] |
| Post subject: | |
btw, http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=38193 covers the YJ axle fairly well. |
|
| Author: | jeepkj02 [ Wed Dec 31, 2008 5:23 pm ] |
| Post subject: | |
Isn't the front D30 YJ a passenger drop or was that only the CJ. |
|
| Author: | ohv_kj [ Wed Dec 31, 2008 6:31 pm ] |
| Post subject: | |
that was a cj...all yj are driver drop |
|
| Author: | swmpthg [ Wed Dec 31, 2008 8:08 pm ] |
| Post subject: | |
JJsKJ wrote:
I didnt get much from that.. so Can i use this axle i have or not? can i ignore the vacum? can I cover it with a plate? or should i just try and get a tj or xj front d30? |
|
| Author: | tjkj2002 [ Wed Dec 31, 2008 8:16 pm ] |
| Post subject: | |
swmpthg wrote: JJsKJ wrote: I didnt get much from that.. so Can i use this axle i have or not? can i ignore the vacum? can I cover it with a plate? or should i just try and get a tj or xj front d30? You can use the YJ's vacu-30 but if not using the vacu disconnect I believe you will need the one piece axles to replace the 2 piece one. |
|
| Author: | JJsTJ [ Wed Dec 31, 2008 8:22 pm ] |
| Post subject: | |
swmpthg wrote: JJsKJ wrote: I didnt get much from that.. so Can i use this axle i have or not? can i ignore the vacum? can I cover it with a plate? or should i just try and get a tj or xj front d30? Yeah I guess it doesn't exactly say Not to use that axle in that link but considering it steers the OP completely Away from it, my guess is don't use it. 
Seriously though, sell the YJ axle to a YJ owner and grab a HPD30 or similar from an XJ. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|