Got a chance to get a good deal on some rims. What size tires will work when I get the 2.5" lift on??

_________________
2006 CRD KJ sport 2.5" with 235/85/16's
95 F250 PSD (not stock)
73 Bronco Buggy (REALLY not stock)
90 Miata (sold)
'49 Studebaker PU (sold)

What's the backspacing and width of the rims?

_________________
June 2001 Liberty Limited 4X4
Frankenlift II Premium, Al's Upper Arms, 245/75R16 C Silent Armors on Moabs, RL Skink Super Sliders, Rear DTT, Riddler Diff Cover, Fastman Throttle Body, Profinish-Proglass Hood, Borla Dual Outlet Exhaust, TransGo Reprogramming Kit, APS Stall Converter, 4.10 Gears, B&G Chrysler PCM, Lots of Line-X, etc...

If your wheels on the Libs don't have the right backspacing they are about worthless. The wheel openings and suspension don't like wheels that work on the regular lifted jeeps. Anything less than 4.5 inches backspacing should be considered suspect as far as not working. 8 inch seems the max in width. If your wheelin' you know that tires more than 10-10.5 inch wide are a waste right? And again won't like the wheelwells. 245/75X16 dimension tires seem about perfect lifted for best performance.

_________________
No one knows as much as all of us.

I would think that 245/70R17's would work since they are the same size as 245/75R16's. I've also seen some people running 255/70R16's which are the same size as 255/65R17's. You are probably going to need a 7-7.5" width and backspacing between 4.5-5.5".

_________________
June 2001 Liberty Limited 4X4
Frankenlift II Premium, Al's Upper Arms, 245/75R16 C Silent Armors on Moabs, RL Skink Super Sliders, Rear DTT, Riddler Diff Cover, Fastman Throttle Body, Profinish-Proglass Hood, Borla Dual Outlet Exhaust, TransGo Reprogramming Kit, APS Stall Converter, 4.10 Gears, B&G Chrysler PCM, Lots of Line-X, etc...