LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Quick question for you guys.
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=8&t=14447		 Page 1 of 1
Author:  Wertzy [ Sun Nov 12, 2006 6:40 pm ]
Post subject:  Quick question for you guys.
My mom just bought an '03 Liberty Freedom Edition about 2 weeks ago and now she already wants some AT tires for it. Since she has the dreaded 17" wheels, I suggested for her to get some 15" wheels so there are a LOT more tire choices for her. More importantly, she can get the BFG AT KO's. However, will the 15" wheels clear the disc's? These are the wheels she wants...

http://store.summitracing.com/partdetai ... toview=sku

Also, would 3.75" BS be too much? Thanks for your help guys.

PS - Here's a quick picture of her KJ. Like I said she's only had it a few weeks but she already loves it. Applause

http://img.photobucket.com/albums/v336/ ... g_0640.jpg
Author:  pixeldzn [ Sun Nov 12, 2006 7:02 pm ]
Post subject: 
There are very few wheels in 15" that will clear. A couple of known ones are rockkrawler black steelies and cragar soft 8s.

A safer choice would be 16" wheels, with BFG TA/KOs or Firestone Destination A/Ts. I had the destination A/Ts in between my stock tires and my MT/Rs and loved them in the snow and on the road.
Author:  Wertzy [ Sun Nov 12, 2006 7:05 pm ]
Post subject: 
pixeldzn wrote:
There are very few wheels in 15" that will clear. A couple of known ones are rockkrawler black steelies and cragar soft 8s.

A safer choice would be 16" wheels, with BFG TA/KOs or Firestone Destination A/Ts. I had the destination A/Ts in between my stock tires and my MT/Rs and loved them in the snow and on the road.

See thats where there's a problem. There arn't any wheels in 16" form that she likes without having to spend an arm and a leg.
Author:  Wertzy [ Sun Nov 12, 2006 9:21 pm ]
Post subject: 
Ok so she decided to go with some 16x8 wheels. How much backspacing and what size tire do you guys recommend?
Author:  pixeldzn [ Sun Nov 12, 2006 10:22 pm ]
Post subject: 
Wertzy wrote:
Ok so she decided to go with some 16x8 wheels. How much backspacing and what size tire do you guys recommend?


Tire Size - 245/70-16 is perfect for an unlifted rig. Just a little bit bigger than stock, and no rubbing or anything like that to worry about.

Backspacing - around 5" is what most people run, including those with Rubicon Moab Rims. So, you want a 16x8 rim, 5 on 4.5 lug pattern, with 4.5 to 5" of backspacing.
Author:  Wertzy [ Sun Nov 12, 2006 10:36 pm ]
Post subject: 
They won't rub? The stock tires on it now, which are 235/65R17 rub a little under mild cornering. :shock:
Author:  moose [ Sun Nov 12, 2006 10:48 pm ]
Post subject: 
Wertzy wrote:
They won't rub? The stock tires on it now, which are 235/65R17 rub a little under mild cornering. :shock:


but you're going from a 17" to a 16" rim, and getting a different backspacing.
Author:  Wertzy [ Sun Nov 12, 2006 10:51 pm ]
Post subject: 
moose wrote:
Wertzy wrote:
They won't rub? The stock tires on it now, which are 235/65R17 rub a little under mild cornering. :shock:


but you're going from a 17" to a 16" rim, and getting a different backspacing.

Ok I'm sorry. My bad. Brainfart. :lol:

Thanks for the help guys. :)
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/