I remember hearing something about the moabs being a weird size? Will this fit: 255/70/16's on a CRD with 2" daystar lift?

_________________
2005 CRD Sport
Mods: Glasspack, OME HD Struts & Springs, 2" Daystar lift,
255/70/16 General Grabber AT2's on MOAB's
ORM&EHM with great success!
TJM T17 Bumper, 50W KC HID's

That's a pretty fat tire, basically a 30x10" or something like that depending on what exact tire you get (could even be a 31x10.5). You would probably have rubbing. The Moab rims won't make much of a difference, but they will probably prevent rubbing on the swaybar, which is good. I'd go for a 2.5" lift if you can, but either way at least expect rubbing on the fog light door areas and pinch weld in the front, and the door flares in the rear. You'd probably have better luck with a 245/75 tire (or a 30x9.5" on a 15" rim). I think I can reasonably say very few LOST members who run tires with true ODs of >31" and widths > 10" either have lots of rubbing or bumpstops. It's hard to tell, but I think a tire's width creates more rubbing than height to a certain extent, on our KJs.

Metric Tire Size Calculator
http://www.4lo.com/calc/gearmetric.htm

_________________
2003 Limited, Silver - L.O.S.T. # 068957 Rockies
http://www.cardomain.com/ride/2127390/14
2006 Kawasaki KLR650