| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Steel wheels http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=8&t=18643 |
Page 1 of 1 |
| Author: | RQuarte [ Fri Mar 16, 2007 11:31 pm ] |
| Post subject: | Steel wheels |
I'm looking for so cheap black steel wheels at the moment all i know of are cragar and u.s. wheel, but are there any other companys that can get me the wheels for cheaper then $53 a pop for cragar soft 8s? I don't need center caps just the wheel. |
|
| Author: | pixeldzn [ Sat Mar 17, 2007 12:02 am ] |
| Post subject: | |
$53 is pretty dern cheap if you ask me. |
|
| Author: | TDI4BY [ Sat Mar 17, 2007 2:40 am ] |
| Post subject: | |
4wheel parts lists some of the 15" ones for our rigs at $46.00 each. http://www.4wheelparts.com/wtProdDetail.aspx?partNo=PCW87-5766 I think these will fit(make sure first), free shipping too. |
|
| Author: | RespectMyLibertay [ Sat Mar 17, 2007 2:42 pm ] |
| Post subject: | |
That wheel might not fit the Lib. 15" wheels need to be check-fitted up front for brake clearance. The Series 51 has been checked, it fits. I think the LOST member who confirmed this is running either the 15x8 or 15x7 5x4.5" 4" BS. Go to your local Discount Tire, they have black steelies with the blue and red stripes that run about $45 a rim and I'm sure they'd be happy to make sure they fit up front if you go with a 15". |
|
| Author: | spoonplugger1 [ Mon Mar 19, 2007 7:41 pm ] |
| Post subject: | |
The 15s that fit only have about 1mm or so clearance between the caliper and the wheel. Get in some deep stuff and there may be a problem due to the lack of cleaance or it may help running the tighter clearance as the bigger stuff can't get in there. Someone who wheels them may know which, or if it's even an issue. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|