| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| 2005 Renegade Tire clearance? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=8&t=19072 |
Page 1 of 1 |
| Author: | brwvtx1800 [ Wed Mar 28, 2007 6:59 pm ] |
| Post subject: | 2005 Renegade Tire clearance? |
I have an 05 Renegade with 245/75-16 BFG which grab the bottom air dam plastic when turning in reverse. With 2.5" of lift this is the only rubbing I notice. I was wondering what other Renegade drivers are experiencing. I was also considering 265/70-16 replacements and was wondering what kind of rubbing these would cause too. I haven't had any pinch-weld rubbing at all. |
|
| Author: | moose [ Wed Mar 28, 2007 8:41 pm ] |
| Post subject: | |
well, i run 235/85r16 (32's) and i had to trim that dam off and into the bumper... |
|
| Author: | PBrug [ Wed Mar 28, 2007 10:58 pm ] |
| Post subject: | |
I have 245/75/16 BFG KO's, but they are on Moab rims which push things out a little. I also have a 2.5" lift and get rubbing on the front wheel well near full lock. At full lock in reverse it catches the edge of the bumper as well. I pounded down the pinch weld and cut off the edges of the air dam before installing the tires, and plan on trimming up the front further. I doubt the rubbing will hurt anything, it just bothers me a little. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|