LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Moabs + spidertrax??
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=8&t=22325		 Page 1 of 1
Author:  broncsrule [ Sat Jul 07, 2007 5:33 pm ]
Post subject:  Moabs + spidertrax??
Has anyone run spacers with the Moabs? If so, did it change any contact/ rubbing points?
Author:  tommudd [ Sat Jul 07, 2007 11:35 pm ]
Post subject: 
First question...Why do you want to run Moabs and spidertrax both to begin with? :? But running an 8 inch wheel with the backspacing that Moabs have and then another 1.25 inches of spacer would bring the edge of the wheel way out past the fender, then if you flex at all I would assume its going to hit big time.
Author:  broncsrule [ Sat Jul 07, 2007 11:42 pm ]
Post subject: 
I was just curious....Good point. I guess that is the reason it inevver has been done. (at least by someone that actually wheels their rig)

I was curious because since I've had the Moabs on, I have alot more rubbing issues than I had when I had the same size tires on my stock Renegade wheels.
Author:  KJ04 [ Sun Jul 08, 2007 8:35 am ]
Post subject: 
broncsrule wrote:
I was just curious....Good point. I guess that is the reason it inevver has been done. (at least by someone that actually wheels their rig)

I was curious because since I've had the Moabs on, I have alot more rubbing issues than I had when I had the same size tires on my stock Renegade wheels.


Describe your rubbing issues, front or rear?
Author:  tjkj2002 [ Sun Jul 08, 2007 10:51 am ]
Post subject: 
broncsrule wrote:
I was just curious....Good point. I guess that is the reason it inevver has been done. (at least by someone that actually wheels their rig)

I was curious because since I've had the Moabs on, I have alot more rubbing issues than I had when I had the same size tires on my stock Renegade wheels.
You have alot more rubbing since switching to the MOAB's from the fact that the MOAB's have 5" BS(and are 8" wide) and the OEM rims have 5.5" BS(only 7" wide),so adding a spacer will decrease the BS even more and cause alot more rubbing.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/