LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Tire Fit
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=8&t=24208		 Page 1 of 1
Author:  wildrussian [ Mon Sep 10, 2007 8:11 am ]
Post subject:  Tire Fit
Hey guys is there anyway I can fit used 265/75/16 Cooper A/Ts on my jeep with 2.5" Rustys lift with one clevis ring in the front and only rustys springs and shocks in the back? What will I have to do to fit these? What will I have to do to fit new 265/75/16s? Thanks
Author:  elephantrider [ Mon Sep 10, 2007 9:17 am ]
Post subject: 
i got 265's with four ring clevis lift, three spring isolators in the rear, and no inner fender flares on the front end.



if you plan to run these off road you will need to get extended bump stops for the rear or you'll tear your rear fender flares off as soon as you stuff the tires.
Author:  wildrussian [ Mon Sep 10, 2007 9:22 am ]
Post subject: 
So you saying there is no way without much trimming and pounding the pinch weld and the bumpstops
Author:  tommudd [ Mon Sep 10, 2007 10:36 am ]
Post subject: 
Yes thats what he is saying you can do it but its a lot of work and possible damage due to ripping off flares etc. Plus you have to think about the possible loss of power due to the larger tires as well
Author:  elephantrider [ Mon Sep 10, 2007 10:36 am ]
Post subject: 
you can do it, but the minimum you'll have to do is pinch weld pounding and extended bump stops.

plan on having rub in various areas if you dont have the extra clevis / spring pads.
Author:  KJ04 [ Mon Sep 10, 2007 8:24 pm ]
Post subject: 
If gas mileage is no problem for you, go for it. I get 12.5 mpg. with rural driving, not city and 14 mpg. highway.
Author:  wildrussian [ Tue Sep 11, 2007 6:59 am ]
Post subject: 
Alright so 265 won't fit without the razoz knife and hammer. How about 245/75/16? what would I have to do to fit these? I am thinking about General Grabber AT2?
Author:  tommudd [ Tue Sep 11, 2007 8:34 am ]
Post subject: 
go for the 245 75 16 s you will still have to do the pinch weld and maybe a little trim job in front but not much
Author:  elephantrider [ Tue Sep 11, 2007 1:48 pm ]
Post subject: 
i ran 245's on moab rims without pounding the pinch weld, but it was REALLY close during turns and off roading.

if you dont mind tearing up your liberty a bit, then go 265's. you will lose some power with that size tire though.

if you want it to run as close to stock as possible, the 245's are the way to go.

the 265's look awesome on the liberty though... :twisted:
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/