photos with 225/75r16 (AT tread preferred) and a lift

dgeist · **Posted:** Mon Sep 24, 2007 5:06 pm

Anyone have this combination and some photos they'd mind sharing? I'm looking at new tires but don't want to have to buy more later if I get a mild lift (like a CRD OME package or similar). Does a KJ look goofy with 225's and a lift?

Johnboy · **Posted:** Tue Sep 25, 2007 9:33 am

I just lifted mine this weekend, still has stock 225/75/16's. With out asking anybody, most of my friends that were around the shop said it actually looked ok with the stock tire size. IMO they look a little small, but not bad at all. I am planning on 245/70/16 before the snow flies. I do not think it is worth all of the trimming and such to get 245/75's on, plus fuel consumption should not change as much either. 235/75/16 are another option. I believe 245/70 and 235/75 will fit stock with little or very minimal rubbing (might ask those that have done it). Sorry, no photos yet. Pester me and I would likely be able to get you some.... The lift is a FLII OME HD and i added about 3/8 inch ot the clevis and an extra spring isolator in the back. Despite the cost, I would never consider any other lift option. It was worth the month of potato soup for dinner to get the lift....

DarbyWalters · **Posted:** Tue Sep 25, 2007 7:12 pm

OME Lift on CRD with 235/75/16s...29.84"...basically a 30" tires with no rubbing issues on stock rims...don't even have to hammer down the pinch weld :idea:

Great CV Axle angles too (you can also see the aggressive tread pattern):

photos with 225/75r16 (AT tread preferred) and a lift

Who is online