I may try a set of 1" or 1.25" spacers to set out our factory 6 spoke 16x7's so they are flush with the fenders.

what thickness of spacer lets you avoid having to grind down the length of the original wheel studs so they don't prevent the whell from seating flat onto the spacer, is 1" thick enough?

_________________
Get off the phone and DRIVE ! ! !

'04 KJ 4x4 auto 3.73's OME HD springs, struts, long travel rears, towbar mounts, rear hitch, FastHID lights: 50 watt 6000k HID's, iPod, XM, Covercraft seatcovers, 5 lbs. of dog hair

and a yellow TJ

http://www.fasthid.com

just go with the 1.25 spidertrax and you will be fine, it will sit the tire out to almost the edge of the fender

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

hmmm......my tires stick out to the fenders basically having 255's..imagin another inch out...that look sweet....

_________________
2004 Liberty Renegade
Silver, loaded
Full skid plates
255/65/16 yokohama Geolander A/T-S
Tow hooks
Flowmaster super 44