| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| what backspacing do i have on my factory wheels? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=8&t=26878 |
Page 1 of 1 |
| Author: | orangez [ Sun Nov 25, 2007 8:28 pm ] |
| Post subject: | what backspacing do i have on my factory wheels? |
what backspacing do i have on my factory wheels? http://cgi.ebay.com/ebaymotors/JEEP-LIB ... enameZWDVW also, what backspacing should i be looking for to work with factory stance and a lift? |
|
| Author: | jason thompson [ Sun Nov 25, 2007 11:23 pm ] |
| Post subject: | Re: what backspacing do i have on my factory wheels? |
orangez wrote: what backspacing do i have on my factory wheels? http://cgi.ebay.com/ebaymotors/JEEP-LIB ... enameZWDVW
also, what backspacing should i be looking for to work with factory stance and a lift? IIRC the OE wheels have 5.5" back spacing as far as what wheels to use with a lift will depend on who you ask ask me and I say keep the OE wheels the will give the least rub with the most tire good example '03 KJ sport 4X4 w/Rusty's spring lift running 30X9.5 R15 on 15X7 black steelies w/3.75 back spacing rubs more than me what I have '03 KJ Limited 4X4 w/OME Lift running 245/75R16 (31X10.5 equivalent) on OE wheels now the Rusty's lift is advertised as a 2.5" lift the OME lift is listed as only being 1.75" so why do you think he rubs more? note that he had more rub front and back than I did when both lifts were new now he rubs more than I and I have wheeled a little more as our KJ is the "test platform" for our 101 course |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|