| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Ar-767 15x8 4" backspacing http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=8&t=27293 |
Page 1 of 1 |
| Author: | Grape [ Fri Dec 07, 2007 12:09 am ] |
| Post subject: | Ar-767 15x8 4" backspacing |
Is anyone running these? I have searched and cannot find anything concrete. Looking at running 31x10.50x15's. |
|
| Author: | cmohr [ Fri Dec 07, 2007 2:06 am ] |
| Post subject: | |
I'm running 31/10.5/15's on 15 X 7in steelies.... I think with the 8in rims that little extra offset will cause you all sorts of dramas turning the front wheels, with the 7's I just get awawy with it. Have a look at this http://www.ausjeepoffroad.com/forum/sho ... hp?t=72321 cmohr |
|
| Author: | jason thompson [ Fri Dec 07, 2007 7:56 am ] |
| Post subject: | Re: Ar-767 15x8 4" backspacing |
Grape wrote: Is anyone running these? I have searched and cannot find anything concrete. Looking at running 31x10.50x15's.
gunna rub bad with those Keep your OE 16" wheels and run 245/75's almost the same size as most 31X10.5 15's but for a 16" rim |
|
| Author: | wildrussian [ Fri Dec 07, 2007 9:00 am ] |
| Post subject: | |
Not going to work too goog unless you want to trim a bunch, I have 4.5 " backspace and they rub, so half inch more to the outside will be rubbing a lot more. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|