Will the stock lug nuts work alright on the soft 8's? I plan on getting some aftermarket stainless steel lugs later. Or should I go ahead and order them now?

Terry

_________________
2011 Ford F-150 XLT 4X4

they will be fine, know a few who are running the stock lug nuts on 8s

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Yup, I have said wheels with factory lugs.

_________________
'74 CJ5
304/T15

the factory lugs are crap if it were me i would replace them asap. get some solid lugs. the srock caps come off and strip really easily imo. i had nothing but trouble with my stock lugs. even had a shop strip them going on and another broke the stud when trying to get them off. i now have solid lugs all the way around with out any of the problems i had before. will they work yes do i think you should replace them yes.

_________________
cactus green 03 sport 3.7
Rusty's coil lift w/ Rancho RSX shocks & 3 ring clevis
custom skids and rock rails ; Surco roof rack w/ hi lift mounted
pioneer cd/aux with Zune mounted on dash; uniden cb with 4' K40 antenna
xeon lights; grill inserts; black wheels; 245/75/16s MTRs
#1281 http://www.cardomain.com/ride/2967585/1

I'm running the stock lugs with soft 8s,but just noticed this morning that two lugs are missing caps.Time to change them out.

_________________
2003 KJ Renegade, 5 speed, frankenlifted,Al's a Arms 4.5,Moabs 245/75/16 BFG KM2's, custom rock rails, full Mopar skids, Hella ff220 lights,Hd cooling,Front DTT,Riddler diff cover,Rola safari rack,Cobra 29 peaked & tuned.

Pastafari Alum, Pink shovel recipient

Like I said I plan on getting some stainless steel ones. NO CAPS! I have a couple of caps that are starting to go but they will last a little longer.

Terry

_________________
2011 Ford F-150 XLT 4X4

I'm using the stock lug nuts on my 16x8 Soft 8's, I've put the caps back on with liquid nails after 2 fell off . As far as holding the rim on they are fine and have stayed tight as a nuns ......... . No plan to change them in the near future .

_________________
Member No: 152595
Susky Bro V The Highlander Terminator, got it Wuggs

Lifted by CRDSTU
265/70/16 STT's on 16x8 Chrome Soft 8's
CDKJ

Any one have a picture of black wheels with stock lug nuts?

_________________
"I'm the guy who does his job, you must be the other guy"
02 Black UNlimited Edition 4X4 Select Trac Liberty Towing/Off Road Packages 245/75/16 on black Moabs
RL diff cover/Super Skink sliders, Rusty's 2.5" Coil Lift w/ clevis lift, Roof basket W/Hella FF75...
On the prowl for an M416/M101/M100 trailer
L.O.S.T. Member 2877

^Those are the stock lugs.

Never had a cap pop off the stock lugs. I used an impact to loosen and slightly tighten them but always torqued them by hand.

If you get solid lugs I wouldnt use an impact to loosen them. I loosen them by hand then use the impact to take them all off and snug them up, then torque with torque wrench. Keeps them looking like new.

_________________
LOST KJ'S
Where are you going???
Current Jeep: 2004 Jeep Liberty
-Atlantic Blue
-Air Ride Rear Suspension ; OME/Rustys Lift ; Powertrax Locker ; Moog Lower Ball-Joints ; 245/70/16 Yokohama Geolander A/T-S's on MOABS ; Flowmaster 50 SUV
Lost #007082
http://www.cardomain.com/id/jeepjeepster