I'm seriously thinking about having my MTR's retreaded when they're worn out. date code on them is 0404 thru 0604 and they're structurally sound.
Wonder if tommudd's brother will hook me up
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| TreadWright ( Hi-Tec retreading) http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=8&t=32387 |
Page 1 of 1 |
| Author: | InCommando [ Sat May 10, 2008 6:45 pm ] |
| Post subject: | TreadWright ( Hi-Tec retreading) |
A buddy just got his 30x 9.5 mudders for his Tracker. I got to tell ya, these are about the sweetest retreads that I have seen. The tread blends very smoothly into the sidewall. They are on BFG carcasses and people have asked him if they are a new BFG tread design ( they are the classic mudder tread design like a Mud Rover or early BFG M/T.) They did take a bit of weight to balance, but not like anything from Interco, according to the owner. The sound like a great alternative, especially for guys with older 2nd rigs or trail-only rigs. BTW: He decoded the DOT info on the sidewall & the carcasses were manufactured in 2005, so they are not old at all. |
|
| Author: | Kniggit [ Mon May 12, 2008 11:45 pm ] |
| Post subject: | |
put a set of 4 "ATD" on my dad's work van, he drives around town mainly, and hardly ever gets up to 60 so cheap was important. They came on a set of 4 Revo carcases, one had been patched, but they all balanced without much weight. Lots of sipping, but its more of a passenger car/delivery vehicle tread, perfect for what we put them on. K |
|
| Author: | Guest [ Tue May 13, 2008 12:36 am ] |
| Post subject: | |
I'm seriously thinking about having my MTR's retreaded when they're worn out. date code on them is 0404 thru 0604 and they're structurally sound. Wonder if tommudd's brother will hook me up
|
|
| Author: | tommudd [ Tue May 13, 2008 1:10 am ] |
| Post subject: | |
ThunderbirdJunkie wrote: I'm seriously thinking about having my MTR's retreaded when they're worn out. date code on them is 0404 thru 0604 and they're structurally sound.
Wonder if tommudd's brother will hook me up My cousin may, have to ask him, they used to do ones that people wanted the same casings back. I will be down there first part of June and will find out what the rate is now and also what all kinds of tread design he now has. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|