LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Just lifted
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=8&t=33500		 Page 1 of 1
Author:  new92xj [ Fri Jun 20, 2008 11:22 am ]
Post subject:  Just lifted
I just put on my Frankenlift II with Moab wheels & GY MTR's 245 75R16. Front rubbing is an issue turning. Bottom piece of the air darn rubs the edge of the tires. What I'm wondering is - who has taken the inner fender right off (opening up more) or just cut part of it off?
Author:  tommudd [ Fri Jun 20, 2008 12:10 pm ]
Post subject: 
its been done everyway , some cut the bottom of the bumper off, some just trim what hits, some heat and bend out of the way what hits some just go wild and remove everything, some buy an ARB and then NO MORE Problems :wink:
Author:  RespectMyLibertay [ Sun Jun 22, 2008 8:37 pm ]
Post subject: 
Hint: you're tires can't rub what's not there! :D :roll:
Sorry I couldn't resist after seeing tommudd's comment...I took out my fender flare liners a long time ago, haven't regretted it since. I've taken all my flares off too, then put them back on after trimming them. One of my front flares flew off on the highway the other day, so I keep both fronts off nowadays.
Author:  new92xj [ Thu Jun 26, 2008 3:19 pm ]
Post subject:  Thanks
ok done some trimming... Working well. May do some more.
Next thing is to get the loud clank fixed when going over speed bumps... Happens on rebound. I've seen others discuss it somewhere here.
Author:  modular [ Thu Jun 26, 2008 3:42 pm ]
Post subject: 
That is most likely the UCA contacting the spring.
Author:  RespectMyLibertay [ Fri Jun 27, 2008 12:42 am ]
Post subject: 
I'm gonna vote swaybar link, probably the bolt onto the lower control arm is loose.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/