| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Wheel/Rim Interchangability http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=8&t=35100 |
Page 1 of 1 |
| Author: | DocB [ Sat Aug 16, 2008 10:59 am ] |
| Post subject: | Wheel/Rim Interchangability |
Hey guys, I need some help. I would like to put a plain old regular steel rim with a used ST tire on out back as the spare tire. What years will match up? What is the official measurements (pattern and back spacing) on the CRD? TIA. |
|
| Author: | DocB [ Sun Aug 17, 2008 2:16 am ] |
| Post subject: | |
Bump. Any help would be appreciated. Thanks. |
|
| Author: | tulsa [ Sun Aug 17, 2008 8:43 am ] |
| Post subject: | |
Any 16" Liberty wheel should work, also Mopar minivans, many mopar cars and some Ford products. Just need 4.5x5(114.3x5) lug pattern and right offset. The wheel width should be be between 6.5 and 7.5" Lewis |
|
| Author: | danoid [ Mon Aug 18, 2008 11:14 am ] |
| Post subject: | |
Stock KJ wheels have a negative offset (the centerline of the tire is displaced from the lugs towards the center of the vehicle). I purchased some Unique Series 297 wheels http://www.uniquewheel.com/catalog_pg2.html that are zero offset. Even with the same nominal size 225/75R16 they still rub in the front. |
|
| Author: | DocB [ Tue Aug 19, 2008 12:50 am ] |
| Post subject: | |
Thanks guys. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|