Tell me I am right and these won't fit.
I can get a screaming deal on 255x75x17 BFG MT's on JK rims (JK take offs)
Follow my logic and see if I make sense.
On a 2.5" lift 235x85x16 (32x9.5) is about the biggest tire acceptable. (spent 2 days reading all the post in here)
255x75x17 (32x10.5) wheelspacer/adapter=1.25", tire is 1" wider so it add .5", JK wheel is 7.5" wide so that adds .25" which is a total of 2" wider/more outset, but the JK has 6.25" back spacing, which is .75" more than the KJ wheels.
All this nets me 1.25" more outset/wider per side!
Comparing this to the 265x75x16 (32x10.5) which is said to rub a lot, I would end up about .25 wider with the JK set up.
Even with buying spacer/adapters I would save $$ using the JK take offs, but I just can't see that they are going to fit....but it would be close....
Edit: to add to my frustration, the BFG site shows the 255x75x16 at 10.04" on a 7" rim. so that would narrow me up .5" from my above figures. Which puts be back right between the 265x75x16 and the 235x85x16 on stock rims.
Arggggghhhh
