It is currently Sun Aug 23, 2026 6:16 pm

View unanswered posts | View active topics


Board index » TECH Section » Tires, Tyres, Meats, Donuts & Wheels

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 
  Print view Previous topic | Next topic 
Author Message
colts_kj
 Post subject: daystar lift and cut bumper 265/75?
PostPosted: Tue Nov 25, 2008 6:00 pm 
Offline
LOST Member
User avatar

Joined: Wed May 28, 2008 11:35 pm
Posts: 451
Location: WINCHESTER, VA/ GARDNER, KS
I have a daystar lift and i cut the front bumper on an 06 sport. I want to put 265/75s on my moabs.
Can i put 265s on without doing a clevis lift or will a clevis lift not even help get me 265s

_________________
06 KJ
HAS
Daystar lift with 02 springs
245 75 16 MTs on Painted Moabs
NEEDS
Skids and Tow Hooks
WANTS
265 75 16s, 4:10s with DTTs, and Frankenlift
Top
 Profile  
 
colts_kj
 Post subject:
PostPosted: Wed Nov 26, 2008 1:11 pm 
Offline
LOST Member
User avatar

Joined: Wed May 28, 2008 11:35 pm
Posts: 451
Location: WINCHESTER, VA/ GARDNER, KS
ok ill just try it

_________________
06 KJ
HAS
Daystar lift with 02 springs
245 75 16 MTs on Painted Moabs
NEEDS
Skids and Tow Hooks
WANTS
265 75 16s, 4:10s with DTTs, and Frankenlift
Top
 Profile  
 
tommudd
 Post subject:
PostPosted: Wed Nov 26, 2008 2:02 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
If you want that size then put them on and start cutting :wink: , make darn sure you have bumpstops rear and front though as you will hit the flares when off road for sure with Moabs

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited
Top
 Profile  
 
colts_kj
 Post subject:
PostPosted: Wed Nov 26, 2008 9:05 pm 
Offline
LOST Member
User avatar

Joined: Wed May 28, 2008 11:35 pm
Posts: 451
Location: WINCHESTER, VA/ GARDNER, KS
How much are bumpstops. and are they simple to put on.

Is the clevis left worth the time and what can i do to the rear so the front isnt higher than the back

_________________
06 KJ
HAS
Daystar lift with 02 springs
245 75 16 MTs on Painted Moabs
NEEDS
Skids and Tow Hooks
WANTS
265 75 16s, 4:10s with DTTs, and Frankenlift
Top
 Profile  
 
dieselenthusiast
 Post subject:
PostPosted: Wed Nov 26, 2008 10:14 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sat Jan 06, 2007 1:54 am
Posts: 5827
Location: 7,000 feet, Zuni Mountains, New Mexico
colts_kj wrote:
How much are bumpstops. and are they simple to put on.

Is the clevis left worth the time and what can i do to the rear so the front isnt higher than the back


Add two rear isolators two each side.

_________________
2015 Ram Ecodiesel/Big Horn/4x4/Quad Cab
2016 Arctic Fox 22G/Onboard 2500 LP Cummins Onan Generator/160 Watt Solar Panel

I took the road less traveled. Now I'm LOST.
Top
 Profile  
 
colts_kj
 Post subject:
PostPosted: Wed Nov 26, 2008 10:40 pm 
Offline
LOST Member
User avatar

Joined: Wed May 28, 2008 11:35 pm
Posts: 451
Location: WINCHESTER, VA/ GARDNER, KS
where can i get the isolators and how do i install them?

_________________
06 KJ
HAS
Daystar lift with 02 springs
245 75 16 MTs on Painted Moabs
NEEDS
Skids and Tow Hooks
WANTS
265 75 16s, 4:10s with DTTs, and Frankenlift
Top
 Profile  
 
dieselenthusiast
 Post subject:
PostPosted: Wed Nov 26, 2008 10:53 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sat Jan 06, 2007 1:54 am
Posts: 5827
Location: 7,000 feet, Zuni Mountains, New Mexico
colts_kj wrote:
where can i get the isolators and how do i install them?


You can get them at the Jeep dealership for $7.00 bucks a piece. Here's what they look like

Image

_________________
2015 Ram Ecodiesel/Big Horn/4x4/Quad Cab
2016 Arctic Fox 22G/Onboard 2500 LP Cummins Onan Generator/160 Watt Solar Panel

I took the road less traveled. Now I'm LOST.
Top
 Profile  
 
long_tall_texan
 Post subject:
PostPosted: Thu Nov 27, 2008 1:02 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Thu Sep 06, 2007 10:13 am
Posts: 1118
Location: DFW, TX
dieselenthusiast wrote:
You can get them at the Jeep dealership for $7.00 bucks a piece.


That varies by dealer apparently. I checked here in Fort Worth, and they quoted me like $19 each for them.

_________________
2007 Light Khaki 4x2 Sport
- Debadged - LTT CAI with Amsoil Filter - JVC HD Radio - Infinity BassLink
- Iggee Seat Covers - Black Moabs - 265/75-16 Cooper Discoverer ATP - 4.10's
- DIY Franky sitting at 23.75" - Al's 4.5 UCAs - Trimmed F&R Bumpers
- Removed Rear Sway Bar - Removed Rear Vibration Damper
- 75k miles so far...
Image
Top
 Profile  
 
dieselenthusiast
 Post subject:
PostPosted: Thu Nov 27, 2008 1:10 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sat Jan 06, 2007 1:54 am
Posts: 5827
Location: 7,000 feet, Zuni Mountains, New Mexico
long_tall_texan wrote:
dieselenthusiast wrote:
You can get them at the Jeep dealership for $7.00 bucks a piece.


That varies by dealer apparently. I checked here in Fort Worth, and they quoted me like $19 each for them.


Actually, I was wrong. I went back to look at my receipt and it shows that I paid $12.00 dollars for each. Part # 52088707AA

_________________
2015 Ram Ecodiesel/Big Horn/4x4/Quad Cab
2016 Arctic Fox 22G/Onboard 2500 LP Cummins Onan Generator/160 Watt Solar Panel

I took the road less traveled. Now I'm LOST.
Top
 Profile  
 
2006 KJ
 Post subject:
PostPosted: Thu Nov 27, 2008 10:55 am 
Offline
LOST Addict

Joined: Mon Sep 04, 2006 10:12 pm
Posts: 2476
Location: Jamestown PA
i would add 2 rear isolators each side... and do a clevis on the front... that is very cheap insurance.. then put on the 265's and trim as needed

_________________
2006 Renegade. Completely stock.
Top
 Profile  
 
colts_kj
 Post subject:
PostPosted: Thu Nov 27, 2008 5:18 pm 
Offline
LOST Member
User avatar

Joined: Wed May 28, 2008 11:35 pm
Posts: 451
Location: WINCHESTER, VA/ GARDNER, KS
well I still may end up doing the lifts but I think i decided to go with 265/70s cooper STT so the height will be the same as my 245s just be an inch or so wider

thanks for the help!

Image

_________________
06 KJ
HAS
Daystar lift with 02 springs
245 75 16 MTs on Painted Moabs
NEEDS
Skids and Tow Hooks
WANTS
265 75 16s, 4:10s with DTTs, and Frankenlift
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 

Board index » TECH Section » Tires, Tyres, Meats, Donuts & Wheels

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 4 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com

Advertisements by Advertisement Management