While we are talking about 15's on an 05 how about these?
http://www.jcwhitney.com/autoparts/Item ... 4711319547
Mean 29"s on a stock liberty
could be a fun cheap way to throw some mud!!!
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| 15" steelies for 05 libby http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=8&t=40464 |
Page 1 of 1 |
| Author: | new92xj [ Fri Feb 20, 2009 11:43 am ] |
| Post subject: | 15" steelies for 05 libby |
Hi, I've got a good chance to get brand new BFG's on 15" steel rims (from 98 TJ) for $500.00 for a friends libby. My question is would these fit? It has the 17" alum wheels now. |
|
| Author: | long_tall_texan [ Fri Feb 20, 2009 11:58 am ] |
| Post subject: | |
Most 15" steel wheels will clear the brake calipers. 15" Aluminums don't. |
|
| Author: | jsc7002 [ Fri Feb 20, 2009 12:01 pm ] |
| Post subject: | |
should, are they the 5x4.5 bolt pattern? |
|
| Author: | tommudd [ Fri Feb 20, 2009 12:17 pm ] |
| Post subject: | |
are they the stock steel rims on the TJ ? They may not fit as only the soft 8s etc in 15 inch fit well I would check them real close on the front of the Libby before you buy, there is a litle difference between soft 8s and production steel wheels |
|
| Author: | long_tall_texan [ Fri Feb 20, 2009 12:24 pm ] |
| Post subject: | |
Good point. I didn't think about that. Correction: Most aftermarket 15" steel wheels will clear the calipers. |
|
| Author: | new92xj [ Fri Feb 20, 2009 1:25 pm ] |
| Post subject: | |
thanks guys. I'll check them first... |
|
| Author: | Guest [ Fri Feb 20, 2009 7:57 pm ] |
| Post subject: | |
There is some clearancing of the caliper necessary for stock Jeep 15s to be bolted on to a KJ |
|
| Author: | stumpjumper_09 [ Thu Feb 26, 2009 10:23 am ] |
| Post subject: | |
While we are talking about 15's on an 05 how about these? http://www.jcwhitney.com/autoparts/Item ... 4711319547 Mean 29"s on a stock liberty could be a fun cheap way to throw some mud!!!
|
|
| Author: | stumpjumper_09 [ Thu Feb 26, 2009 10:23 am ] |
| Post subject: | |
how about these? http://www.jcwhitney.com/autoparts/Item ... 4711319547 |
|
| Author: | jsc7002 [ Thu Feb 26, 2009 11:12 am ] |
| Post subject: | |
they look like they would work stumpjumper but what BS are you going to get? once you lift it you'll want less BS, 4" is what most get after they lift. |
|
| Author: | stumpjumper_09 [ Thu Feb 26, 2009 11:24 am ] |
| Post subject: | |
i don't know the backspacing. All jc waitawhile has to say is that they are custom fit to wrangler with 5x4.5 bolt pattern |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|