I am running 31x10.5x15
I dont have any problems rubbing, but I also trimmed my front and rear bumpers before I had this size tire. I would imagine that some trimming would need to happen, but for your size not much trimming.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| 30x9.5x15 anyone? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=8&t=50550 |
Page 1 of 2 |
| Author: | BennyMigs [ Fri Feb 26, 2010 9:46 am ] |
| Post subject: | 30x9.5x15 anyone? |
I can get a good deal on a set of Crager soft 8's with General Grabber AT2 with 100 miles on them. I have a about 3inch lift. Does anyone know if they will rub? |
|
| Author: | yodejt02 [ Fri Feb 26, 2010 9:54 am ] |
| Post subject: | Re: 30x9.5x15 anyone? |
I am running 31x10.5x15 I dont have any problems rubbing, but I also trimmed my front and rear bumpers before I had this size tire. I would imagine that some trimming would need to happen, but for your size not much trimming.
|
|
| Author: | BennyMigs [ Fri Feb 26, 2010 9:58 am ] |
| Post subject: | Re: 30x9.5x15 anyone? |
Thanks I think I'm going to get them. |
|
| Author: | yodejt02 [ Fri Feb 26, 2010 10:17 am ] |
| Post subject: | Re: 30x9.5x15 anyone? |
backspacing is the real issue, i believe guys are running 3.75" or 4" |
|
| Author: | BennyMigs [ Fri Feb 26, 2010 10:32 am ] |
| Post subject: | Re: 30x9.5x15 anyone? |
the rims are 15 x7 4inch BS |
|
| Author: | yodejt02 [ Fri Feb 26, 2010 11:12 am ] |
| Post subject: | Re: 30x9.5x15 anyone? |
That will work just fine. Dont freak out about the clearence around the front calipers. When I put mine on I thought that they would not fit around the calipers. When people told me the clearence would be close, I didnt think it was gonna be that close! Best disicion I made, it changes the stance and look of the jeep. I would say other than the lift, the new wheels have been the thing that most people comment on how great the jeep looks. post some pics when you get them mounted! |
|
| Author: | BennyMigs [ Fri Feb 26, 2010 12:24 pm ] |
| Post subject: | Re: 30x9.5x15 anyone? |
I will. Thanks for your help. |
|
| Author: | JeepinJarhead03 [ Fri Feb 26, 2010 6:03 pm ] |
| Post subject: | Re: 30x9.5x15 anyone? |
I ran 255-70-16's which are 30x9.5-16 if i recall correctly, both before lifted with no spacers and after lifted with spidertrax and slight front fenderwell rubbing around the foglight access holes and on the pinch were the only rubs on spidertrax the pinch rub will be worse with M/T style tires, but a good pinch pounding will cure it no idea what the rub would have been like lifted with no spacers, i never ran them that way but i'm positive it'll work as yodejt stated |
|
| Author: | Murphyman [ Fri Feb 26, 2010 10:02 pm ] |
| Post subject: | Re: 30x9.5x15 anyone? |
I want that same size. My 31x10.5-15 tires rub on the pinch weld, even after getting pounded. Don't have much of a clevis lift and I don't really have the resources here to pound it down or clevis lift it. So I'm thinking about getting some 30x9.5-15... In AT cause my Treadwright MT/R are having a hard time in this snow. |
|
| Author: | JeepinJarhead03 [ Fri Feb 26, 2010 10:15 pm ] |
| Post subject: | Re: 30x9.5x15 anyone? |
i hear that i'm probably going to end up going with 30x10.5x15 i need to try to guestimate accurately the rim backspace needed ontop of the spacers to clear the pinch, i think if i went inboard half an inch with the tires, it would clear whatever that comes to with backspacing in comparison to the 16x7 allow and a 15x7 steel i don't have a friggin clue? |
|
| Author: | yodejt02 [ Fri Feb 26, 2010 10:19 pm ] |
| Post subject: | Re: 30x9.5x15 anyone? |
yeah after all this talk I gotta check my backspacing too. I dont remember if I have 4.5 or 4. |
|
| Author: | BennyMigs [ Sat Feb 27, 2010 7:18 am ] |
| Post subject: | Re: 30x9.5x15 anyone? |
Look what I started haha The price I'm getting on these is $525 Thats the rims and tires with 100 mile on them. This sounds like a good deal right. |
|
| Author: | yodejt02 [ Sat Feb 27, 2010 9:31 am ] |
| Post subject: | Re: 30x9.5x15 anyone? |
sounds pretty good. Those rims are usually prices around $40-60 a piece depending on where you look. And the cheapest tires I know of new or almost new would be treadwrights at about $85 a piece. |
|
| Author: | BennyMigs [ Mon Mar 01, 2010 10:37 pm ] |
| Post subject: | Re: 30x9.5x15 anyone? |
It's done. The rims and tire are on and fit great with no rubbing.  The max PSI marked on the tire is 50 psi. What do you guys load yours to?
|
|
| Author: | colts_kj [ Mon Mar 01, 2010 10:54 pm ] |
| Post subject: | Re: 30x9.5x15 anyone? |
can we get pics? |
|
| Author: | JeepinJarhead03 [ Mon Mar 01, 2010 11:08 pm ] |
| Post subject: | Re: 30x9.5x15 anyone? |
varies slightly depending on the tire itself and whether it's front or rear, i wet roll them or chalk them and adjust till the contact patch is full with the 255's it was 34 front 35.5 rear, with the 245 courser m/t's its 34.5 front 36.5 rear but i need to rechalk and adjust a bit they're bagging a bit like they want more around 40psi, on a stock suspension i would typically air it rather close to what the vehicle sticker details, but once you change the suspension ratios that sticker is meaningless, if i recall correctly .5 psi is roughly equivalent to 50 lbs of suspension resistance |
|
| Author: | BennyMigs [ Tue Mar 02, 2010 12:15 am ] |
| Post subject: | Re: 30x9.5x15 anyone? |
I'll have pics tomorrow. Thank for the help. |
|
| Author: | BennyMigs [ Tue Mar 02, 2010 1:25 pm ] |
| Post subject: | Re: 30x9.5x15 anyone? |
These are great. Around 30 to 40 MPH a little of hum but nothing the radio can not fix. I still need a spare. I'm going to use the factory center caps and paint them black. I just ordered black lugs. I may also sharpie the white letters black.       
|
|
| Author: | VMKJCRD [ Tue Mar 02, 2010 6:03 pm ] |
| Post subject: | Re: 30x9.5x15 anyone? |
Hey Benny! Looking good. All you need to do is tint the windows and you'll be golden. 
|
|
| Author: | BennyMigs [ Tue Mar 02, 2010 6:21 pm ] |
| Post subject: | Re: 30x9.5x15 anyone? |
I love the look of tint but do not like having it dark in the car. |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|