LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

cragar soft 8's
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=8&t=60846
Page 1 of 2

Author:  drewlaxer [ Mon May 23, 2011 11:14 am ]
Post subject:  cragar soft 8's

Hey guys,
Im looking at getting some cragar soft 8's for my renny. Wanted to get some opinions from those of you who have the soft 8's. I have the renny rims now and i like them but that look of an all black wheel and tire is just awesome. Any thoughts?

Here is my rig, its stock for now except for my surco roof rack..
Image
Image

oh and does anyone know if RockLizard is still up and running, gave him a ring but never got a reply....?

Author:  RED_KJ_666 [ Mon May 23, 2011 12:50 pm ]
Post subject:  Re: cragar soft 8's

Do it lol 15x7 4" of BS and some 31's
Image

Author:  infernicus [ Mon May 23, 2011 1:09 pm ]
Post subject:  Re: cragar soft 8's

I have the Cragar D-Windows
Image

Author:  RED_KJ_666 [ Mon May 23, 2011 3:10 pm ]
Post subject:  Re: cragar soft 8's

I personally like the look of the D-Windows more than the Soft 8's. I would have bought them but where I ordered my 8's from only had 1 D window in stock.
I really like those Cowl mounted lights, what size and how much do they interfere with your line of site? Sorry for the Hi-Jack :)

Author:  drewlaxer [ Mon May 23, 2011 3:24 pm ]
Post subject:  Re: cragar soft 8's

check this post....

http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=58438&hilit=hood+mounted+lights

Author:  drewlaxer [ Mon May 23, 2011 3:54 pm ]
Post subject:  Re: cragar soft 8's

Nice looking rigs guys. :BANANA: So i was looking up tire sizes and it seems that 245/70's are the biggest that will fit my stock lift with perhaps some rubbing. I think im going to hold off on a lift for now and i believe that the cragar soft 8's with some 245/70's will look darn good, and i dont mind a little trimming to counter the tire rubbing. Anyone have experience running the cragar soft 8's with some 245/70's on stock springs??

Author:  liquidxit2 [ Mon May 23, 2011 5:58 pm ]
Post subject:  Re: cragar soft 8's

How is the brake clearance with 15s? I would love to go to 15s but I also want my brakes to breathe.

Author:  drewlaxer [ Mon May 23, 2011 6:13 pm ]
Post subject:  Re: cragar soft 8's

liquidxit2 wrote:
How is the brake clearance with 15s? I would love to go to 15s but I also want my brakes to breathe.


Not sure, i def would like to find out also. It looks like 501 has what i would like, maybe he can put in his :2cents: lol......but i did find this forum http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=8&t=50344 kinda answers my questions. The more i browse the forums the more i am drawn to getting a lift....maybe a clevis lift?...... :juggle:

liquid,

what lift are you running? i like the look of yours.

Author:  liquidxit2 [ Mon May 23, 2011 6:29 pm ]
Post subject:  Re: cragar soft 8's

drewlaxer wrote:
liquidxit2 wrote:
How is the brake clearance with 15s? I would love to go to 15s but I also want my brakes to breathe.


Not sure, i def would like to find out also. It looks like 501 has what i would like, maybe he can put in his :2cents: lol......but i did find this forum http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=8&t=50344 kinda answers my questions. The more i browse the forums the more i am drawn to getting a lift....maybe a clevis lift?...... :juggle:

liquid,

what lift are you running? i like the look of yours.


Yeah 501s pics are what is making me consider 245 75 16 tires.

Im running a frankenlift premium 2 with JBA UCAs. The tires are 245 70 16 look a bit smaller, but not terrible. Definitely want some soft 8s though. As for clevis lifts I cant help there, but frankenlifts (full OME now) make the jeep handle and drive ALOT better. Well worth the time and money.

Author:  drewlaxer [ Mon May 23, 2011 6:39 pm ]
Post subject:  Re: cragar soft 8's

liquidxit2 wrote:
drewlaxer wrote:
liquidxit2 wrote:
How is the brake clearance with 15s? I would love to go to 15s but I also want my brakes to breathe.


Not sure, i def would like to find out also. It looks like 501 has what i would like, maybe he can put in his :2cents: lol......but i did find this forum http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=8&t=50344 kinda answers my questions. The more i browse the forums the more i am drawn to getting a lift....maybe a clevis lift?...... :juggle:

liquid,

what lift are you running? i like the look of yours.


Yeah 501s pics are what is making me consider 245 75 16 tires.

Im running a frankenlift premium 2 with JBA UCAs. The tires are 245 70 16 look a bit smaller, but not terrible. Definitely want some soft 8s though. As for clevis lifts I cant help there, but frankenlifts (full OME now) make the jeep handle and drive ALOT better. Well worth the time and money.


How many inches of lift does the frankey II get you......2-3?

Author:  tommudd [ Mon May 23, 2011 6:51 pm ]
Post subject:  Re: cragar soft 8's

We do have a wheel and tire section you know
and stock the wheels 501 has would rub unless you only park it in the front yard

Author:  liquidxit2 [ Mon May 23, 2011 11:35 pm ]
Post subject:  Re: cragar soft 8's

drewlaxer wrote:
How many inches of lift does the frankey II get you......2-3?


Well I was around the high 17in low 18in range stock, now Im 23.5 front 21.2ish in the rear (need rear isos bad). I love it but I really need to twist her up to break it in more.

tommudd wrote:
We do have a wheel and tire section you know
and stock the wheels 501 has would rub unless you only park it in the front yard


Yeah 245 75 16s are way to big for stock KJs, I believe the tallest tire is a 235 75-16 which is a 29.8ish in tire.

Edit: whoops! Meant 75 and not 85!

Author:  RED_KJ_666 [ Mon May 23, 2011 11:51 pm ]
Post subject:  Re: cragar soft 8's

liquidxit2 wrote:
drewlaxer wrote:
How many inches of lift does the frankey II get you......2-3?


Well I was around the high 17in low 18in range stock, now Im 23.5 front 21.2ish in the rear (need rear isos bad). I love it but I really need to twist her up to break it in more.

tommudd wrote:
We do have a wheel and tire section you know
and stock the wheels 501 has would rub unless you only park it in the front yard


Yeah 245 75 16s are way to big for stock KJs, I believe the tallest tire is a 235 85-16 which is a 29.8ish in tire.


That my Friend would be wrong

235/85/16 = 31.7x9.3/16
http://www.redrock4x4.com/tireconversio ... =Calculate

Author:  liquidxit2 [ Tue May 24, 2011 1:28 am ]
Post subject:  Re: cragar soft 8's

Lol whoops meant to say 235 75 16. Doh!

Oh and forgot to mention that size is probably on fresh stock or prelowered kj as 245 70 16s sometimes rubbed at full lock. But then again I was also sagged a lot.

Sent from my PG06100 using Tapatalk

Author:  BugginKJ [ Tue May 24, 2011 9:24 am ]
Post subject:  Re: cragar soft 8's

I say keep your rims and black them out, maybe keep the brushed aluminum outside ring around it. Do something different other than those rims every one is running. 245 70 16 fit stockers just fine, I ran mine from about 20,000 miles to just recently at 41,000 roughly then got lifted. Prior to the lift I had no rubbing at all but then again this has been discussed in the tire section many times. :JEEPIN:

Author:  drewlaxer [ Tue May 24, 2011 9:58 am ]
Post subject:  Re: cragar soft 8's

Yeah i found the answers to my questions in the tires section, sorry guys should have researched the forums more..... :banghead:

Author:  BugginKJ [ Tue May 24, 2011 10:16 am ]
Post subject:  Re: cragar soft 8's

drewlaxer wrote:
Yeah i found the answers to my questions in the tires section, sorry guys should have researched the forums more..... :banghead:

Not a problem at all really. I know first hand when your new and want answers ya want them right now. I found with a bit of carefull reading and or research you will find just about everything ya want to ask when new, already asked somewhere :wink:
As far as your rims go I wish I had a set of belly button soft 8 to dish off to ya as I would trade ya in a second for those factory aluminum rims. Like I said already I would consider doing something different with your factory rims, as there is nothing wrong with them. Maybe doing them in black with the aluminum ring on the outsdie or going full black but I know what I would do :wink: But also to each his or her own which is what makes owning a Jeep so fun but is also why I choose to do things a lil different if and when I can :JEEPIN: Have fun and good luck :JEEPIN:

Author:  drewlaxer [ Tue May 24, 2011 10:38 am ]
Post subject:  Re: cragar soft 8's

BugginKJ wrote:
drewlaxer wrote:
Yeah i found the answers to my questions in the tires section, sorry guys should have researched the forums more..... :banghead:

Not a problem at all really. I know first hand when your new and want answers ya want them right now. I found with a bit of carefull reading and or research you will find just about everything ya want to ask when new, already asked somewhere :wink:
As far as your rims go I wish I had a set of belly button soft 8 to dish off to ya as I would trade ya in a second for those factory aluminum rims. Like I said already I would consider doing something different with your factory rims, as there is nothing wrong with them. Maybe doing them in black with the aluminum ring on the outsdie or going full black but I know what I would do :wink: But also to each his or her own which is what makes owning a Jeep so fun but is also why I choose to do things a lil different if and when I can :JEEPIN: Have fun and good luck :JEEPIN:

Buggin,
Thanks for the :2cents: I have seen a couple guys on here do their rims black, it does look nice. The more i think about it and the more i research the forums i feel like it would just be easier/better to lift it a couple inches, then i would be able to have more fun with it and put some meaner tires on it. :JEEPIN:

Author:  liquidxit2 [ Tue May 24, 2011 10:44 am ]
Post subject:  Re: cragar soft 8's

BugginKJ wrote:
I say keep your rims and black them out, maybe keep the brushed aluminum outside ring around it. Do something different other than those rims every one is running. 245 70 16 fit stockers just fine, I ran mine from about 20,000 miles to just recently at 41,000 roughly then got lifted. Prior to the lift I had no rubbing at all but then again this has been discussed in the tire section many times. :JEEPIN:


Another reason to do soft 8s or moabs is to lessen or possibly fix the sway bar rubbing at full lock. Other then looks thats my main reason.

Author:  BugginKJ [ Tue May 24, 2011 10:54 am ]
Post subject:  Re: cragar soft 8's

liquidxit2 wrote:
BugginKJ wrote:
I say keep your rims and black them out, maybe keep the brushed aluminum outside ring around it. Do something different other than those rims every one is running. 245 70 16 fit stockers just fine, I ran mine from about 20,000 miles to just recently at 41,000 roughly then got lifted. Prior to the lift I had no rubbing at all but then again this has been discussed in the tire section many times. :JEEPIN:


Another reason to do soft 8s or moabs is to lessen or possibly fix the sway bar rubbing at full lock. Other then looks thats my main reason.

At 41,000 something and running 245 70 16's Destination At's, I had no rub at all. The look is personal which is why I would sway away from the soft 8's, everyone seems to get them at first instead of doing something different. Just my :2cents:

Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/