LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

TJ steels ?
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=8&t=69016		 Page 1 of 1
Author:  ando [ Wed May 30, 2012 4:54 am ]
Post subject:  TJ steels ?
Guy's, I know of a set of black 15" steel wheels off a TJ going for a good price, but not sure about:

A. will the bolt pattern match ?

B. if so, they are only 4" backspace, so will they foul the front arch when steering to full lock with 30" tyre's ?

I realise they will stick out in the region of 2" more, but I have a small lift (40mm at front) and think that might be ok for my use of the truck ..

What d'ya reakon ?
Author:  tommudd [ Wed May 30, 2012 10:08 am ]
Post subject:  Re: TJ steels ?
If stock TJ wheels they will not fit but it sounds like they are aftermarket with the backspacing
Bolt pattern is the same
what width are they that can be a deal breaker as well
if 7 inch you'll be fine
maybe some light rubbing but with lift should be a go
Author:  ando [ Wed May 30, 2012 2:45 pm ]
Post subject:  Re: TJ steels ?
Cheers Tomm :wink:

Ok, so the bolt pattern is the same, but they are 15" x 8" !!! :? will this be a prob with 30x9.5x15's on ?
Author:  tommudd [ Wed May 30, 2012 3:32 pm ]
Post subject:  Re: TJ steels ?
You could run them but that is wide for that size, plus you could have more rubbing due to width
Author:  ando [ Wed May 30, 2012 3:44 pm ]
Post subject:  Re: TJ steels ?
Ok cheers mate :wink: ... seems they may be a little bit more of a gamble than I can afford whether they work or not :( ... might have to give them a swurve :cry:
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/