| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| is it worth it http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=8&t=834 |
Page 1 of 1 |
| Author: | 4wdParakeet [ Mon Aug 01, 2005 1:50 am ] |
| Post subject: | is it worth it |
Okay I'm debating right now I can get a set of rubicon rims for 400 bucks. That's for 5 btw. Now I like the way my graffite wheels look. My first question is do you KJ gurus think that it would be worth the investment or should I stick with the stockers. My next question is: When I lift it I'm going to want the biggest tires I can get without rubbing our looking funny (you know tires to small for the lifted vehicle). Any opnions are very much appreciated. Parakeet |
|
| Author: | Calvin56 [ Mon Aug 01, 2005 11:30 am ] |
| Post subject: | |
Are you getting them for looks or do the rims come with the BFG M/t's too? If they are wheels only, I'd say it wouldn't be worth it. There are a lot of other wheels out there that you can buy new for the same price. I might be a little off, but I really like the RockCrawler wheel look on the KJ, other than that, I really like the look of the Renny Rims that I have on my '02. If you like the look of your current rims, I'd stay stick with them and buy some steel Rock Crawlers to put M/T's on (should be able to get 5 for under $300). I don't know about you, but my daily commute is 25 miles each way, and that can really take the wear out of some M/T's, so I prefer to have a separate set of wheels to go wheeling with. If you get the BFG's along with the wheels, go for it, that is definately worth it! |
|
| Author: | skrracing [ Mon Aug 01, 2005 11:38 am ] |
| Post subject: | Spare tires and wheels |
If you like the Rubi wheels and you are willing to pay for them then it it waorth it to you. I think the rubi wheels look great on a KJ but I am running stock steel wheels with my off orad tires. they really get beat up and when they bend I just beat it back in place with a hammer. I do feel that having a spare set of wheels and tires is a great way to save wear and tear on the off road tires.. I know it does not look as good to have the street tires but then again the off road tires cost a lot and I hate running them on the street. Hope that helps. Later...Clint |
|
| Author: | Guest [ Mon Aug 01, 2005 4:09 pm ] |
| Post subject: | |
For the most part, I agree with calvin and clint. I too like the Rubi wheels but I don't think their worth the money (especially retail), since in my opinion there are better looking aftermarket wheels than the Rubi's (for less money). I've always heard the smart thing to do was get a lift first, then spec tires. Since I'm not sure if tires are included w/ the Rubi's, in my opinion, it's a tough call.... |
|
| Author: | Skyjump136 [ Mon Aug 01, 2005 6:17 pm ] |
| Post subject: | |
I picked up a set of 5 rims and MTRs (w/ less than 5000 miles) for $650. I think you can probably do better. |
|
| Author: | 4wdParakeet [ Tue Aug 02, 2005 12:36 am ] |
| Post subject: | rubicon wheels |
Okay the guy that's selling the rubicon wheels got the wheels and tires from his buddy that got a rubicon and drove it straight from the dealership to where ever to have the lift put on. The man selling the wheels took the MT/R's off of the wheels and put them on his ZJ. He said he would sell me the wheels for 400 bucks for all 5. I work for a stearship that sells tires so I could get just about any tire I wanted for just over cost. I like the way the rubicon wheels look but I guess what I'm really after is would the extra width of the wheel vs. stock renny wheel give any advantages or would it end up creating more problems ie. rubbing, etc. I think I'm going to go with the MT/R's or comparable on the tires because I don't want to have to switch tires out just to go wheeling. My trips sometimes are very unplanned. Parakeet |
|
| Author: | Liberator [ Sun Aug 14, 2005 3:07 am ] |
| Post subject: | Rubi |
I want a set of Rubicons but I don't see myself offroad much and am not getting a lift. My options are limited to tire size because of the clearance and the wider wheel. What is the average price of Rubicons with or without the MTR's? |
|
| Author: | Fouros [ Sun Aug 14, 2005 5:07 pm ] |
| Post subject: | |
i say go for it i am jealous of you guys as we dont get rubicons in Australia so no chance for me to get some pretty awesome looking rims for the KJ |
|
| Author: | Guest [ Sun Aug 14, 2005 8:09 pm ] |
| Post subject: | |
Fouros wrote: i say go for it
i am jealous of you guys as we dont get rubicons in Australia so no chance for me to get some pretty awesome looking rims for the KJ Hey mate, you know you can shop Mopar Parts via the internet!.... Example from online catalog; 16"x8", 5 spoke production "MOAB" wheel, sparkle silver clearcoat, with Jeep center cap, must order in sets of 4. (Single wheels order service p/n. # 82208904) $199.99 / each USD (retail). Now I say go for it! |
|
| Author: | Fouros [ Sun Aug 14, 2005 8:14 pm ] |
| Post subject: | |
cool now I need ammunition for the Minister for finance and recreation to OK it, i have just convenced her i needed a lift and rock rails, it does not help that one aussie dollar is only worth 76 us cents |
|
| Author: | Guest [ Sun Aug 14, 2005 8:45 pm ] |
| Post subject: | |
Fouros wrote: cool Say no more. Good Luck! now I need ammunition for the Minister for finance and recreation to OK it, i have just convenced her i needed a lift and rock rails, it does not help that one aussie dollar is only worth 76 us cents |
|
| Author: | InCommando [ Mon Aug 15, 2005 10:38 am ] |
| Post subject: | |
Hey Parakeet.If you don't want those and would be willing to lug them to the UPS store....... |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|