I had to Dremel off a couple of sections of the airdam under the front bumper and I know that before I take it off the pavement I'll have to hammer down the pinch weld but for now....YEEHAWW!!!
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Skinny No More!! 265/75 MT/R http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=8&t=9657 |
Page 1 of 1 |
| Author: | SethX9 [ Mon Jun 19, 2006 11:45 pm ] |
| Post subject: | Skinny No More!! 265/75 MT/R |
I had to Dremel off a couple of sections of the airdam under the front bumper and I know that before I take it off the pavement I'll have to hammer down the pinch weld but for now....YEEHAWW!!!
|
|
| Author: | SethX9 [ Mon Jun 19, 2006 11:45 pm ] |
| Post subject: | |
images fixed |
|
| Author: | pixeldzn [ Tue Jun 20, 2006 12:16 am ] |
| Post subject: | |
Tried to fix it for you - and found out you can't hotlink from Yahoo. You'll have to post them elsewhere, like imageshack (my fav) first. |
|
| Author: | tjkj2002 [ Tue Jun 20, 2006 12:21 am ] |
| Post subject: | |
Welcome to the 265/75R 16 goodyear MT/R club,that's what I'm running.They really make a KJ look mean.what type of rims and backspacing are you running?I'm running 16"x8" rims with 3.75" backspacing and only have front rub near the beaten down pinchweld area at full lock(got the skyjacker lift with the new soft ride coils and hate them,need to get frankinlifted!!!). |
|
| Author: | SethX9 [ Tue Jun 20, 2006 1:12 am ] |
| Post subject: | |
pixeldzn: thanks for the help and the heads up on imageshack tjkj2002: wheels are the upgraded polished wheels that were available for the '05 Sports...I have no idea what the backspacing is but for the street I only rubbed a bit in reverse on the airdam which I trimmed. the ride is so much better with these heavier stiffer tires...can not WAIT to get some dirt under'em 
|
|
| Author: | longarm [ Tue Jun 20, 2006 1:16 am ] |
| Post subject: | |
.......... |
|
| Author: | SethX9 [ Tue Jun 20, 2006 1:33 am ] |
| Post subject: | |
Quote: All you had to do to fit the 265's was trim the air dam and beat back the pinch weld?
Actually, all I had to do was trim the air dam. I just know before I go wheelin' I'll have to get that pinch weld down. For now it's not giving me any rubbing. |
|
| Author: | corwyyn [ Tue Jun 20, 2006 4:43 am ] |
| Post subject: | |
Good to hear Seth. Saw your post on the 'Coke Ovens Run' thread and I'm ready to go. I'm only running 235/75-16s on stock height but it should still be fun 
|
|
| Author: | SethX9 [ Tue Jun 20, 2006 9:20 am ] |
| Post subject: | |
Kevin - I went through Box Canyon (the Florence one not the one near Wickenburg), Broken Arrow in Sedona and the back road to Crown King...all on stock 235/60 SR-As and stock height. It'll be nice to not hear all that bangin' and thumpin' under me 
Lookin' forward to that Coke Oven run. I've been wanting to get out there and take some pictures since I first heard about it. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|