| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| How do you remove the front bumper? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=26305 |
Page 1 of 1 |
| Author: | toy4everyseason [ Wed Nov 07, 2007 11:54 pm ] |
| Post subject: | How do you remove the front bumper? |
Can someone point me in the right direction on how to get this front bumper off? Does the grill need to come off? How the heck do you get the plastic retainers that hold on the plastic wheel wells off? Just feel like taking something apart but I thought i'd get some info first. |
|
| Author: | jsc7002 [ Thu Nov 08, 2007 10:11 am ] |
| Post subject: | |
it should be similar to the others right??, if so heres how to remove it: http://www.jeepkj.com/forum/showthread.php?t=25620 |
|
| Author: | toy4everyseason [ Thu Nov 08, 2007 4:45 pm ] |
| Post subject: | |
awe man you have to drill out the plastic rivets, I'd just replace them with the screw out type. |
|
| Author: | kj in a tight spot [ Sat Nov 17, 2007 1:49 am ] |
| Post subject: | |
Removing Jeep Liberty front bumper Tutorial: Step 1: Tie down strap securely to front bumper Step 2: Get a F-250 and tie off the strap to its rear Step 3: Put the F-250 in drive Step 4: Put the skinny pedal to the floor and.... Aint gonna be no more front bumper 
|
|
| Author: | Diggerfreek [ Sat Nov 17, 2007 2:07 am ] |
| Post subject: | |
kj in a tight spot wrote: Removing Jeep Liberty front bumper Tutorial:
Step 1: Tie down strap securely to front bumper Step 2: Get a F-250 and tie off the strap to its rear Step 3: Put the F-250 in drive Step 4: Put the skinny pedal to the floor and.... Aint gonna be no more front bumper I like your way of thinking!!! You should really be working for caterpillar 
|
|
| Author: | kj in a tight spot [ Sat Nov 17, 2007 2:08 am ] |
| Post subject: | |
Diggerfreek wrote: kj in a tight spot wrote: Removing Jeep Liberty front bumper Tutorial: Step 1: Tie down strap securely to front bumper Step 2: Get a F-250 and tie off the strap to its rear Step 3: Put the F-250 in drive Step 4: Put the skinny pedal to the floor and.... Aint gonna be no more front bumper I like your way of thinking!!! You should really be working for caterpillar Who says I aint
Naw Im just a country boy reliving some memories of high school truck pulls
|
|
| Author: | Diggerfreek [ Sat Nov 17, 2007 2:14 am ] |
| Post subject: | |
well, if your country, why not use that green JD tractor thingy and have a whole load of fun |
|
| Author: | kj in a tight spot [ Sat Nov 17, 2007 2:19 am ] |
| Post subject: | |
Diggerfreek wrote: well, if your country, whu not use that green JD tractor thingy and have a whole load of fun
Ahh dont worry we had ourselves our share of tractor pulls too Its just something that is much more appealin hearin squwakin tires and the tell tale *SNAP* of an axle shaft that only comes long with a truck pull and not a tractor pull 
We used the tractors to try and pull down the biggest trees Dumb rednecks in high school, dont tell the Green Peace on us
|
|
| Author: | Diggerfreek [ Sat Nov 17, 2007 2:23 am ] |
| Post subject: | |
oh well green peace can go jump in a lake.... at work we just either front loader of 740 haul trucks to restring winches on dozers...its always fun to see which one of the two blows more smoke
|
|
| Author: | kj in a tight spot [ Sat Nov 17, 2007 2:33 am ] |
| Post subject: | |
Diggerfreek wrote: oh well green peace can go jump in a lake.... at work we just either front loader of 740 haul trucks to restring winches on dozers...its always fun to see which one of the two blows more smoke
I take it you work for CAT then???
|
|
| Author: | Diggerfreek [ Sat Nov 17, 2007 2:35 am ] |
| Post subject: | |
yep |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|