It is currently Sat Nov 07, 2026 7:37 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 21 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Ditching the muffler or the resonator?
PostPosted: Fri Nov 16, 2007 4:54 pm 
Offline
LOST Addict
User avatar

Joined: Fri May 19, 2006 4:27 pm
Posts: 2130
Location: Dayton, OH
I was wondering if anyone has though of ditching the muffler or the resonater to see what affect it may have on fuel mileage or power? People used to cut out the muffler on ford contours and it gave them a little more pep and a nice sound to boot. So how bout it Diggerfreek, you up for some exhaust mods?
Image

_________________
It may be that your only purpose in life is to serve as a warning to others.

06 CRD Sport
Built 5/11/06
Jeep Green
Rocklizard diff cover
V6 Airbox


Top
 Profile  
 
 Post subject:
PostPosted: Fri Nov 16, 2007 5:09 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Wed Oct 10, 2007 9:42 pm
Posts: 809
Location: Omaha NE
I was looking at changing the muffler but then I would need a shop to bend me that bendy tail pipe section. I wish they didn't weld that section to the muffler. :( I'm gonna wait for the magnaflow to come out.

_________________
08 KK OEM skid plates, JK winch bumper w/ Hella 500s, K&N filter, JKS front discos, black out headlights w/ fogs added, blacked out & euro mod tail lights, Curt Hitch w/ oem wiring, OME Springs, JBA UCA & top plates, Cabin Filter Retro Fit, Custom Fender Mounted Light Mounts w/ Hella 500s, ATH roof bars, rear flush mount LEDs


Top
 Profile  
 
 Post subject:
PostPosted: Sat Nov 17, 2007 12:59 am 
Offline
LOST Addict
User avatar

Joined: Thu Sep 13, 2007 1:28 am
Posts: 10686
Location: Some where in Colorado
i'm waiting on my exhaust also...I know people that have nitros, have reported a increase of 2 mpg with out the resonator and a flowmaster muffler....

_________________
2008 KK Liberty Sport NIGHT OPS EDITION + GILLS
OEM & Custom Skids - Factory Tow Package - Rock Lizard Skink Super Sliders
Prototype JBA 4 Inch Lift - JBA UCA's - Flowmaster Super 44 OR - Whacked Resonator
Jet Stage 2 - RL Gecko Basket Rack - Custom Winch Bumper - Recon 10.5K Winch
Image


Top
 Profile  
 
 Post subject:
PostPosted: Sat Nov 17, 2007 1:40 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Aug 26, 2005 6:11 pm
Posts: 995
Location: Fresno, CA
toy4everyseason wrote:
I was looking at changing the muffler but then I would need a shop to bend me that bendy tail pipe section. I wish they didn't weld that section to the muffler. :( I'm gonna wait for the magnaflow to come out.


Get yourself a sawzall (looks like the new Libertys could seriously benefit from some hackin of this and that :lol: ), cut off the turndown, get yourself a straight pipe to replace the resonator, weld the turndown to the pipe and the pipe to the original exhaust, no more resonator :wink: Aint too hard, even if you cant do it a shop wouldnt charge no more than prolly $20-$30 for it......

_________________
Brian

'05 Yellow TJ Rubicon 6spd

Click here for my Jeep Mods

Redneck Yacht Club for life!!


Top
 Profile  
 
 Post subject:
PostPosted: Sat Nov 17, 2007 11:18 am 
Offline
LOST Newbie
User avatar

Joined: Wed Nov 14, 2007 1:29 am
Posts: 82
Location: Montana
Diggerfreek wrote:
i'm waiting on my exhaust also...I know people that have nitros, have reported a increase of 2 mpg with out the resonator and a flowmaster muffler....


So you have something on order to replace the stock muffler? Be sure and keep us posted on your results after your exhaust mod....

So taking off the resonator and swapping out the muffler won't disturb the computer or power curve then? And will this cause any problems with the lifetime power train warranty?

Thanks

_________________
Just purchased a brand new 08 Liberty 4x4 Limited, Auto Trans, Command Traq, Light Graystone Pearl. Looking forward to being part of the forum.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Nov 17, 2007 12:12 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
All you would need to do to replace the muffler is to cut right in front and right behind the original muffler get one with the same inlet and outlets and weld it in, and what kj in a ts said about the resonator, 1/2 hour job at tops no bending pipes etc. Muffler looks like center in offset out which everyone makes. For the resonater you could always weld in one of those 4 inch BLING chrome tailpipes! I said you could dont do it though :roll: unless youre doing the 22s as well :wink:

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject:
PostPosted: Sat Nov 17, 2007 3:06 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Tue Jul 05, 2005 8:23 am
Posts: 3544
Location: New Braunfels, Texas
Honestly, I would try the cheap route of cutting out the muffler and welding or clamping in a straight pipe. The Muffler is what is going to be hit offroad. Leave on the Resonator for now and see how it sounds and performs...cost hardly nothing!

_________________
Founder of L.O.S.T.
2006 CRD Sport

Mods: GDE Hot Tune w/ 364#@2000rpm/Air Box /3" Str8 Exhaust/ASFIR Alum Skids/245-75R-16 Cooper STT PRO/OME LIFT w/Clevis & 4 Spring Isos/AirTabs/Rigid 10" S2 LED/4xGuard Ctr Matrix Bumper
Drag Strip:Reac=.1078_60ft=2.224_1/8=10.39@64.8mph_1/4+16.46@80.8mph


Top
 Profile  
 
 Post subject:
PostPosted: Sat Nov 17, 2007 7:28 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
True that would work well and the resonator would sound pretty good just by itself, someone try it quick! :wink:

tom

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject:
PostPosted: Sat Nov 17, 2007 8:01 pm 
Offline
LOST Addict
User avatar

Joined: Thu Sep 13, 2007 1:28 am
Posts: 10686
Location: Some where in Colorado
here are some pictures.....lets hear what you think

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

_________________
2008 KK Liberty Sport NIGHT OPS EDITION + GILLS
OEM & Custom Skids - Factory Tow Package - Rock Lizard Skink Super Sliders
Prototype JBA 4 Inch Lift - JBA UCA's - Flowmaster Super 44 OR - Whacked Resonator
Jet Stage 2 - RL Gecko Basket Rack - Custom Winch Bumper - Recon 10.5K Winch
Image


Top
 Profile  
 
 Post subject:
PostPosted: Sat Nov 17, 2007 8:33 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Tue Jul 05, 2005 8:23 am
Posts: 3544
Location: New Braunfels, Texas
Gotta say Jeep makes a nice stock exhaust (except for the CRD)...I say remove the stock muffler cleanly (in case you want to put it back in) and clamp a nice piece of pipe in it's place. Leave the rest alone and tell us what it sounds and feels like.

_________________
Founder of L.O.S.T.
2006 CRD Sport

Mods: GDE Hot Tune w/ 364#@2000rpm/Air Box /3" Str8 Exhaust/ASFIR Alum Skids/245-75R-16 Cooper STT PRO/OME LIFT w/Clevis & 4 Spring Isos/AirTabs/Rigid 10" S2 LED/4xGuard Ctr Matrix Bumper
Drag Strip:Reac=.1078_60ft=2.224_1/8=10.39@64.8mph_1/4+16.46@80.8mph


Top
 Profile  
 
 Post subject:
PostPosted: Sat Nov 17, 2007 9:03 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
Xs 2.........gain ground clearance and should sound good as well, a good shop should be able to do that real cheap

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject:
PostPosted: Sat Nov 17, 2007 9:27 pm 
Offline
LOST Addict
User avatar

Joined: Thu Sep 13, 2007 1:28 am
Posts: 10686
Location: Some where in Colorado
as soon as i get all of my sample issues taken care of i will start working on the exhaust...hopefully next weekend

_________________
2008 KK Liberty Sport NIGHT OPS EDITION + GILLS
OEM & Custom Skids - Factory Tow Package - Rock Lizard Skink Super Sliders
Prototype JBA 4 Inch Lift - JBA UCA's - Flowmaster Super 44 OR - Whacked Resonator
Jet Stage 2 - RL Gecko Basket Rack - Custom Winch Bumper - Recon 10.5K Winch
Image


Top
 Profile  
 
 Post subject:
PostPosted: Sat Nov 17, 2007 9:36 pm 
Offline
LOST Newbie
User avatar

Joined: Wed Nov 14, 2007 1:29 am
Posts: 82
Location: Montana
Hello

Whats that U-shaped piece of metal on the exhaust pipe in the first pic?

_________________
Just purchased a brand new 08 Liberty 4x4 Limited, Auto Trans, Command Traq, Light Graystone Pearl. Looking forward to being part of the forum.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Nov 17, 2007 9:53 pm 
Offline
LOST Addict
User avatar

Joined: Thu Sep 13, 2007 1:28 am
Posts: 10686
Location: Some where in Colorado
Image


possibly a heat sink?

_________________
2008 KK Liberty Sport NIGHT OPS EDITION + GILLS
OEM & Custom Skids - Factory Tow Package - Rock Lizard Skink Super Sliders
Prototype JBA 4 Inch Lift - JBA UCA's - Flowmaster Super 44 OR - Whacked Resonator
Jet Stage 2 - RL Gecko Basket Rack - Custom Winch Bumper - Recon 10.5K Winch
Image


Top
 Profile  
 
 Post subject:
PostPosted: Sat Nov 17, 2007 10:21 pm 
Offline
LOST Newbie
User avatar

Joined: Wed Nov 14, 2007 1:29 am
Posts: 82
Location: Montana
Yeah, that makes sense, never thought of that.....

_________________
Just purchased a brand new 08 Liberty 4x4 Limited, Auto Trans, Command Traq, Light Graystone Pearl. Looking forward to being part of the forum.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Nov 17, 2007 11:58 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Tue Jul 05, 2005 8:23 am
Posts: 3544
Location: New Braunfels, Texas
It adds one extra Horseshoe Power 8)

_________________
Founder of L.O.S.T.
2006 CRD Sport

Mods: GDE Hot Tune w/ 364#@2000rpm/Air Box /3" Str8 Exhaust/ASFIR Alum Skids/245-75R-16 Cooper STT PRO/OME LIFT w/Clevis & 4 Spring Isos/AirTabs/Rigid 10" S2 LED/4xGuard Ctr Matrix Bumper
Drag Strip:Reac=.1078_60ft=2.224_1/8=10.39@64.8mph_1/4+16.46@80.8mph


Top
 Profile  
 
 Post subject:
PostPosted: Sun Nov 18, 2007 12:00 am 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
One extra horsepower , can we retrofit those to the KJ?? I will take two for sure! :-)r

tom

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject:
PostPosted: Sun Nov 18, 2007 1:36 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Tue Jul 05, 2005 8:23 am
Posts: 3544
Location: New Braunfels, Texas
The catch is you have to feed your Jeep OATS :P

_________________
Founder of L.O.S.T.
2006 CRD Sport

Mods: GDE Hot Tune w/ 364#@2000rpm/Air Box /3" Str8 Exhaust/ASFIR Alum Skids/245-75R-16 Cooper STT PRO/OME LIFT w/Clevis & 4 Spring Isos/AirTabs/Rigid 10" S2 LED/4xGuard Ctr Matrix Bumper
Drag Strip:Reac=.1078_60ft=2.224_1/8=10.39@64.8mph_1/4+16.46@80.8mph


Top
 Profile  
 
 Post subject:
PostPosted: Mon Dec 03, 2007 10:25 pm 
Offline
LOST Newbie
User avatar

Joined: Wed Nov 14, 2007 1:29 am
Posts: 82
Location: Montana
Diggerfreek wrote:
as soon as i get all of my sample issues taken care of i will start working on the exhaust...hopefully next weekend


Hello,

Was just wondering if you've done any exhaust mods yet?

_________________
Just purchased a brand new 08 Liberty 4x4 Limited, Auto Trans, Command Traq, Light Graystone Pearl. Looking forward to being part of the forum.


Top
 Profile  
 
 Post subject:
PostPosted: Mon Dec 03, 2007 10:27 pm 
Offline
LOST Addict
User avatar

Joined: Thu Sep 13, 2007 1:28 am
Posts: 10686
Location: Some where in Colorado
no, im going to make some calls this week

_________________
2008 KK Liberty Sport NIGHT OPS EDITION + GILLS
OEM & Custom Skids - Factory Tow Package - Rock Lizard Skink Super Sliders
Prototype JBA 4 Inch Lift - JBA UCA's - Flowmaster Super 44 OR - Whacked Resonator
Jet Stage 2 - RL Gecko Basket Rack - Custom Winch Bumper - Recon 10.5K Winch
Image


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 21 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com