| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| exhaust smell http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=36771 |
Page 1 of 1 |
| Author: | KKommando [ Wed Oct 15, 2008 12:32 am ] |
| Post subject: | exhaust smell |
well i put on my flowmaster about 3 weeks ago and still im getting the smell you know the smell if you have ever got an aftermarket muffler when i got magnaflows in my grand prix i had no smell after a week not even anyone know whats up with this is it flowmaster? |
|
| Author: | Inc [ Wed Oct 15, 2008 12:51 am ] |
| Post subject: | |
I never got any smell from my flowmaster. ????? |
|
| Author: | KKommando [ Wed Oct 15, 2008 4:27 am ] |
| Post subject: | |
not even from the packing? oh geez i think we might have a situation here lol oh well when my motor blows up ill switch it back to stock and get jeep to replace it |
|
| Author: | Mr Nick [ Wed Oct 15, 2008 7:44 am ] |
| Post subject: | |
Flowmasters don't have any packing on the inside like a Magnaflow does. The exhaust shop may have put some hi-temp paint on over their welds to prevent rust, but that shouldn't smell for 3 weeks... if at all. |
|
| Author: | zoso7374 [ Wed Oct 15, 2008 4:52 pm ] |
| Post subject: | |
Two questions for you Flowmaster fellas . . . 1.) How is the interior noise in the Liberty? Particularly in the back seat. Any droning? 2.) How much fabrication was required to install? I would be getting installed at a Midas, what should I anticipate in terms of installation cost? |
|
| Author: | Inc [ Wed Oct 15, 2008 4:57 pm ] |
| Post subject: | |
Well for me, there is a bit of drone inside, I've never ridden in the back of my KJ though. But after I put the lift and MTs on I can't hear the drone at all. I can still hear it growl though. I love it. I have the Super 44 Off Road Flowmaster btw. |
|
| Author: | Diggerfreek [ Thu Oct 16, 2008 12:07 am ] |
| Post subject: | |
no drone at all in mine... and mine did stink for a little while... as far as fab, if you want to go the cheap way and no welds, less that 20 bucks at auto zone for parts.. 3 clamps and a section of pipe |
|
| Author: | KKommando [ Thu Oct 16, 2008 1:57 am ] |
| Post subject: | |
if you just want it put in with clamps prolly 70 but if you want a tip too it will prolly run around 100 |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|