NEED HELP ASAP!!!

Mike08Liberty · **Posted:** Tue Feb 24, 2009 7:44 pm

OK, I've been throwing a check engine light for the past few weeks and just now got around to looking into it. I bought an OBD II reader (everyone should have one of these) and checked the code.

The code is PO113 (Intake Sensor) so I figured it was because of my K&N intake so I just wanted to erase the code and forget about it. Well it wouldn't erase ...

After further inspection of my engine bay I found this ... (pic below)
There is a wire that got cut and is now missing it's sensor. Can someone please take a pic of their engine bay and show me where this sensor is supposed to go so I can order a new one from the dealership ...

THANKS!!!

There is a harness just to the left of the alternator with 5 leads from coming from it ... You can see the missing one here.

Diggerfreek · **Posted:** Tue Feb 24, 2009 7:56 pm

you lost the Intake air temp sensor. looks like it got cut by the fan. There should be a spot in you intake for the sensor. Give me 5 minutes and I will have a picture and a part number for you

Diggerfreek · **Posted:** Tue Feb 24, 2009 8:17 pm

4606487AB mopar part number.... 05 to 07 libertys, 06 to 07 GC's with the 6.1L, 07 to 08 compass, and 07 wranglers all use this intake air temp sensor if you want to hit a junk yard or hit up napa ECHTS57225 for 32 bucks. I don't have a p/n for the female connector end

Mike08Liberty · **Posted:** Wed Feb 25, 2009 9:25 am

Thank you for the help!!! I'm going to head over to my local Pick-N-Pull and see what they have ...

Will the dealership have the female end?

1AB XJ · **Posted:** Wed Feb 25, 2009 11:23 am

Digger, you are the man! I wish there were more people like you out in the world. Quick to help out. Man, that's a trait you see less and less of these days. You're a good example for others to follow, myself included.

zoso7374 · **Posted:** Wed Feb 25, 2009 1:25 pm

1AB XJ wrote:

Digger, you are the man! I wish there were more people like you out in the world. Quick to help out. Man, that's a trait you see less and less of these days. You're a good example for others to follow, myself included.

x2 . . . Digger you always come through!

Diggerfreek · **Posted:** Wed Feb 25, 2009 9:17 pm

Mike08Liberty wrote:

Thank you for the help!!! I'm going to head over to my local Pick-N-Pull and see what they have ...

Will the dealership have the female end?

They should be able to get it with the correct pins...NAPA might be able to get it to

MtnLuvr · **Posted:** Wed Feb 25, 2009 9:23 pm

zoso7374 wrote:

1AB XJ wrote:

Digger, you are the man! I wish there were more people like you out in the world. Quick to help out. Man, that's a trait you see less and less of these days. You're a good example for others to follow, myself included.

x2 . . . Digger you always come through!

x3, I agree Digger's the man in a good way. Now, just don't let that head of yours get too big that you'll flip your lifted KK over :lol:

Diggerfreek · **Posted:** Wed Feb 25, 2009 9:38 pm

Thanks guys

I try to do my best...... The whole trouble shooting/research thing has always been one of my strong points and if I can save some one some cash, well I going to do it

oh and I don't have to worry about my head, I have a counter balance mounted above my belt :lol:

SilverKK09 · **Posted:** Thu Feb 26, 2009 9:31 am

Digger:
you SUCK!!!!!! :shock:

hahahaha j/k! We love y ou man!!!

If the OP or anyone else needs to see the engine bay and sensors and whathave you then go to the KK tech section and there is a HOW TO writeup for aem´s intake.....
theres a lot of pics in there!

Diggerfreek · **Posted:** Thu Feb 26, 2009 7:36 pm

we should probably make a 08 and 09 picture section so we can show people what is different

SilverKK09 · **Posted:** Thu Feb 26, 2009 7:40 pm

heck! you are the admin! use my pics wisely :lol:

Mike08Liberty · **Posted:** Mon Mar 02, 2009 3:27 pm

Well after going to 3 local junk yards and not finding a newer model Jeep, I ended up just ordering the parts new.

Temp Sensor Wiring Harness (5014003AA) = $26.90
Intake Temp Sensor MOPAR (4606487ab) = $33.25

In order to get the female end I had to order the wiring harness. The wiring harness is a special order and I should have it in 7-10 days. The sensor was in stock.

Once again thanks Digger for the help!!!

Diggerfreek · **Posted:** Mon Mar 02, 2009 7:51 pm

Not a problem... It's sad that you had to order the harness :roll:

..... 98% of Caterpillar stuff is replaceable... and if it isn't, well it is the whole unit

Mike08Liberty · **Posted:** Mon Mar 02, 2009 10:22 pm

The harness is cheaper then the sensor ... I thought it would be the other way around. It does suck that I have to order all that but it was my mistake. I wasn't paying attention when I finished installing my intake and that's what I get ... Oh-well Live and Learn!!!

NEED HELP ASAP!!!

Who is online