Sway bar QD's

nightdrv · **Posted:** Fri Feb 27, 2009 12:55 pm

Need help locating aftermarket rear sway bar quick-disconnects... All I've found so far are for JK's. Anyone know what I can do? Please, no flaming.

Diggerfreek · **Posted:** Fri Feb 27, 2009 8:40 pm

FLAME SUIT ON :twisted:

na really, as far as I know there isn't a disco out there for either the front or rear. Also keep in mind that if you did disconnect the sway bar, it is possible to flex the axle enough on the KK to allow the spring to pop out....

you could order the sway bar end links from JBA like I have and make your own using a stud and clevis pin to mount it to the sway bar because the new one bolts up with a bolt instead of a crazy ball joint stud thingy

nightdrv · **Posted:** Fri Feb 27, 2009 9:53 pm

Yea, I had a thought about doing that. I just hope it stays tight enough not to rattle while it IS connected. Also, to keep the springs from coming out (as I was thinking about that also) I was looking at limiting straps.

Thanks for the pic though :idea:

Diggerfreek · **Posted:** Fri Feb 27, 2009 9:59 pm

no prob

Sway bar QD's

Who is online