| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| fender might hit? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=45167 |
Page 1 of 1 |
| Author: | tools113 [ Mon Jul 20, 2009 7:51 pm ] |
| Post subject: | fender might hit? |
I am looking at some 17x 8" with 4 1/2" off set they will stick out about an inch past fender. No lift kit installed. I am concerned that I might hit fender under centain conditions such as turning and hitting bump at same time. Any one have this problem Or am i better off with 17x 8 with a 5.1/2" offset - any issues with these |
|
| Author: | Mike08Liberty [ Mon Jul 20, 2009 9:22 pm ] |
| Post subject: | |
What size tire? |
|
| Author: | tools113 [ Mon Jul 20, 2009 10:04 pm ] |
| Post subject: | |
probably 245-70 17 - nothing drastic try to stay with same diameter as i have - 29" |
|
| Author: | Mike08Liberty [ Mon Jul 20, 2009 10:36 pm ] |
| Post subject: | |
245/70-17 is actually a 30.5" tall tire 245/65-17 is a 29.6" tall tire 235/65-17 is a 29.2" tall tire OEM tire height is 29.1 I'm running a 255/65-16. My tires are 29.1" tall x 10.4" wide and I don't rub. I've ran a 255/70-16 which is 30.3" tall x 10.2" wide and I didn't have any rubbing issues. My wheels are a +25 offset which is what saves me from rubbing, especially when I had the 255/70-16. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|