LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

More Air ;more work on the Grill
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=46859		 Page 1 of 1
Author:  hrogi [ Thu Oct 01, 2009 6:21 pm ]
Post subject:  More Air ;more work on the Grill
Has anyone removed the blocked slots on teh gril on teh Far left side?

In hope of having more Air going into the Air intake tube?

I am bad and did not search on this.
So if you did it how did it come out?>
Author:  Diggerfreek [ Thu Oct 01, 2009 7:06 pm ]
Post subject: 
Not that I know of.....If you want more air, you need to enlarge the intake tube to the air filter box............
Author:  Scar0 [ Thu Oct 01, 2009 7:51 pm ]
Post subject: 
My ride is a Nitro and this is what I did to get more air. I added a RAM air intake. Maybe you could do something similar to your ride.
The nice thing is I can cap it for water crossings if I need to, and with the stock intake still in place I am less likely to get hydro locked.
Also with it installed at the bottom of the air box, any water that gets in, has a way to get out.
Image
Image
Image
Image
Author:  Diggerfreek [ Thu Oct 01, 2009 8:06 pm ]
Post subject: 
:D Now thats what I'm talking about
Author:  Scar0 [ Thu Oct 01, 2009 8:37 pm ]
Post subject: 
I know the front grill set up is different, but maybe someone could adapt the idea? Maybe even a snorkel of some kind? :shock:
Author:  Jeepin_it_real [ Thu Oct 01, 2009 10:24 pm ]
Post subject: 
hey scar did youever think of spraying t hat PVC black in order to make it look stock... i mean its tucked behind but you could still kinda see it... if it was black it would almost look like it was OEM... also i believe on our stock air boxes there is a tube that sorta does what you did scar... but it isnt directly linked to the outside... maybe you do use that piece?
Author:  Diggerfreek [ Thu Oct 01, 2009 10:26 pm ]
Post subject: 
Jeepin_it_real wrote:
hey scar did youever think of spraying t hat PVC black in order to make it look stock... i mean its tucked behind but you could still kinda see it... if it was black it would almost look like it was OEM... also i believe on our stock air boxes there is a tube that sorta does what you did scar... but it isnt directly linked to the outside... maybe you do use that piece?


Yeah... yuo could have gotten black PVC.... :mrgreen:
Author:  Jeepin_it_real [ Thu Oct 01, 2009 10:28 pm ]
Post subject: 
this part


Image
Author:  SilverKK09 [ Fri Oct 02, 2009 12:12 am ]
Post subject: 
OMG
COPYRIGHT INFRINGEMENT!!!
USING MA PICTURE WITHOUT MA WRITTEN CONSENT!!!
Diggah!
you know what to do
Image
Author:  Jeepin_it_real [ Fri Oct 02, 2009 12:55 am ]
Post subject: 
lol silver kk ya caught me... haha but thank you silver for the great mod hot to... i must praise you because i did use it to install my intake :D
Author:  Diggerfreek [ Fri Oct 02, 2009 1:02 am ]
Post subject: 
:?: :?: :?:

Me see nothing wrong :mrgreen:



Image
Image




Image
Author:  Jeepin_it_real [ Fri Oct 02, 2009 1:27 am ]
Post subject: 
nice doggy... i got a picture of my girlfriends dog upside down makign a smirk like that lol
Author:  Scar0 [ Fri Oct 02, 2009 2:52 am ]
Post subject: 
Diggerfreek wrote:
Jeepin_it_real wrote:
hey scar did youever think of spraying t hat PVC black in order to make it look stock... i mean its tucked behind but you could still kinda see it... if it was black it would almost look like it was OEM... also i believe on our stock air boxes there is a tube that sorta does what you did scar... but it isnt directly linked to the outside... maybe you do use that piece?


Yeah... yuo could have gotten black PVC.... :mrgreen:

PVC does not come in 3" black(unless special ordered), only 2" & 4". PVC doesn't paint well, So white it is. The tube to the front is black. Just with the flash it looks white.

The stock intake is still there as I stated above. So the rig is less likely to hydro lock.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/