LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

TB diameter
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=47214		 Page 1 of 1
Author:  Fatnate [ Thu Oct 15, 2009 7:17 pm ]
Post subject:  TB diameter
Does anyone know the OD of the throttle body. I would measure it myself, but my Jeep has been in the shop for a week. I think that it's 2.25in but I'm not sure. Thank you.
Author:  Jeepin_it_real [ Thu Oct 15, 2009 7:59 pm ]
Post subject: 
you want the size opening of the mouth?... if so why? considering the fastman throttle body?
Author:  Fatnate [ Thu Oct 15, 2009 11:34 pm ]
Post subject: 
I just want the OD of the inlet side, the plastic part. I'm making a CAI or thinking about it.
Author:  Scar0 [ Sat Oct 17, 2009 2:50 am ]
Post subject: 
OD is just under 3" but more than 2.75". I made my own CAI using the stock rubber coupler on the intake and a 3" OD sewer pipe coupler(made for R/Vs), with a 3" ID(smooth bore) sewer hose(R/V also). It was a tight squeeze to get it in, but the ID's were a darn near perfect match.
I cut the coupler in half to make it shorter so the bends wouldn't be so tight in the hose.
Image
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/