I just took some pictures
Can you see my plastic fender broken?
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| 245x70x16 no lift http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=47249 |
Page 1 of 1 |
| Author: | DaveV [ Sat Oct 17, 2009 6:59 pm ] |
| Post subject: | 245x70x16 no lift |
Does anyone know if this will fit stock wheels w/no lift? |
|
| Author: | geene519 [ Sat Oct 17, 2009 7:13 pm ] |
| Post subject: | |
thats what i'm running... |
|
| Author: | TAHOE [ Sat Oct 17, 2009 7:27 pm ] |
| Post subject: | |
They work on a stock KJ, should work on Stock KK too. |
|
| Author: | SkinInc69 [ Sat Oct 17, 2009 8:47 pm ] |
| Post subject: | |
Your fine. You can fit 255/70-16s ok a stock KK with stock wheels. B |
|
| Author: | nightdrv [ Sat Oct 17, 2009 9:35 pm ] |
| Post subject: | |
Same overall size as the big brothers. |
|
| Author: | GREEKJEEPER [ Mon Oct 19, 2009 2:54 pm ] |
| Post subject: | |
I am running 235/75R16 and i have problem . The plastic (its not plastic on Crd's but i dont know the material in English) cover inside my fender broke in two pieces after a good flex pass. |
|
| Author: | Jeepin_it_real [ Mon Oct 19, 2009 7:18 pm ] |
| Post subject: | |
greekjeeper post some pics |
|
| Author: | GREEKJEEPER [ Tue Oct 20, 2009 2:27 pm ] |
| Post subject: | |
I just took some pictures
Can you see my plastic fender broken? |
|
| Author: | Jeepin_it_real [ Tue Oct 20, 2009 4:09 pm ] |
| Post subject: | |
thats weird... digger wanna chime in? |
|
| Author: | Diggerfreek [ Tue Oct 20, 2009 4:22 pm ] |
| Post subject: | |
I have to wait till I get home to see the pictures... stupid IT filters 
|
|
| Author: | SkinInc69 [ Tue Oct 20, 2009 6:56 pm ] |
| Post subject: | |
GREEKJEEPER wrote: I just took some pictures
Can you see my plastic fender broken? Maybe yours is rubbing because you have a CRD and the heavy weight of the diesel gave you a lower front end ride hieght. |
|
| Author: | Diggerfreek [ Tue Oct 20, 2009 11:44 pm ] |
| Post subject: | |
That might be from the tire, but it looks like a stick or branch ripped it apart.... Is it broken on both sides and if not, is it riveted to the front bumper right there on the other side? |
|
| Author: | GREEKJEEPER [ Thu Oct 22, 2009 4:41 pm ] |
| Post subject: | |
Yes CRD's are lower at the front. But, come on, it souldn't rub like that . The top end limit of the suspension is the same as the 3.7, Maybe you didn't reach you suspension limits 
|
|
| Author: | DaveV [ Sun Nov 01, 2009 7:43 pm ] |
| Post subject: | |
So has anyone had any rubbing issues off road with this set up besides the CRD? |
|
| Author: | DaveV [ Thu Jan 21, 2010 4:05 pm ] |
| Post subject: | Re: 245x70x16 no lift |
bump.... |
|
| Author: | KK_Canuck_Guy [ Thu Jan 21, 2010 5:26 pm ] |
| Post subject: | Re: |
SkinInc69 wrote: Your fine. You can fit 255/70-16s ok a stock KK with stock wheels. B Hey SkinInc69, did you have those 255/70- 16's when you were stock? Just wondering if there will be any rubbing. I am thinking of getting that size on the stock 16inch rim no lift. Just looking to get an A/T not M/T |
|
| Author: | DaveV [ Fri Jan 29, 2010 10:10 pm ] |
| Post subject: | Re: 245x70x16 no lift |
Anyone have pics of stock KK w/ 245/70 r16 in an AT tire front and side pics... |
|
| Author: | stumpjumper_09 [ Fri Jan 29, 2010 10:16 pm ] |
| Post subject: | Re: 245x70x16 no lift |
I'm with digger on this one. I would be willing to bet something got caught between the tire and fenderwell. |
|
| Author: | das4x4 [ Sat Jan 30, 2010 12:24 pm ] |
| Post subject: | Re: 245x70x16 no lift |
DaveV, Check out the sticky Wheel and Tire section. Photos of various set ups with wheel/tire combos. You'll find your 245-70 on stock in there I believe. I'm going to mount a set of 245's or 255's - 70's in a few weeks on my stock rims. 30K on the original Good Years and past time to say bye-bye to those. I'll be using a 2" Daystar lift until I can raise the needed cash for skids and then coils. My off roading is limited, so the Daystar will give me what I need for now. My inspiration for lift/wheel/tire combo comes from SkinInc's rig. I'm hoping to get a rim/tire package deal. If not, I'll stick to the stock rims which I think are nice looking anyway. Good luck |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|