LOST JEEPS :: View topic - Front bumper interest

looks pretty good man... all i would do if try n fit the signals back in.. looks liek there is room, then if you can have someone weld a sheet of sheet from the bumper to signal... and paint it the factory color if you can... also the front fenders look like they need to be cut... go for it!... haha as i can see there is a bumperless kj in your pics... steal your buddies bumper??? :roll:

I like your skills Mark!

Can you leave the upper bumper pieces in place?

Diggerfreek wrote:

I like your skills Mark!

Can you leave the upper bumper pieces in place?

LOL it is amazing what you can do with MS paint!

Not sure about the upper bumper pieces, I have not had mine off yet. Let me check the FSM...

:ROTFL: Nope. Had the Bra, uh, grill off several times. Never got to her pants, uh, bumper though.
I went out and checked. Nope for sure, it is part of the bumper fascia.

OK how did my post get ahead of yours?

Scar0 wrote:

OK how did my post get ahead of yours?

Crap! Here we go again :banghead:

Author:	Rock Lizard [ Mon Dec 21, 2009 6:20 pm ]
Post subject:	Front bumper interest
So, I finally got the Rock Monitor Front bumper designed up for the KJ, and during my design found out that it is fairly universal and will work on the KK as well. The bumper itself is the same for all Liberties 02 - Present, but what goes on top of it is the only thing that has to change, and for the 02-04 and 05-07 Liberties it is just a matter of simply bolting on the correct accessories to the top of the bumper. The KK Rock Monitor will have parts that will be on the top of the bumper to fill in the gap between the top of the bumper and the bottom of the grill, and of course provisions for the turn signals. Just wanted to give you guys a quick tease of what the Phase IV convertible winch bumper looks like on the KJ to get an idea what it will be like on the KK. I am shooting for a February production time frame. and prototype on the KK

Author:	Mike08Liberty [ Mon Dec 21, 2009 8:31 pm ]
Post subject:	Re: Front bumper interest
I like it and February is perfect for a time frame for me ... A+ Git-er-dun

Author:	wingnuts [ Mon Dec 21, 2009 9:03 pm ]
Post subject:	Re: Front bumper interest
definitly wanna see what the finished will look like

Author:	Jeepin_it_real [ Mon Dec 21, 2009 9:32 pm ]
Post subject:	Re: Front bumper interest
looks pretty good man... all i would do if try n fit the signals back in.. looks liek there is room, then if you can have someone weld a sheet of sheet from the bumper to signal... and paint it the factory color if you can... also the front fenders look like they need to be cut... go for it!... haha as i can see there is a bumperless kj in your pics... steal your buddies bumper???

Author:	Diggerfreek [ Mon Dec 21, 2009 10:27 pm ]
Post subject:	Re: Front bumper interest
Jeepin_it_real wrote: looks pretty good man... all i would do if try n fit the signals back in.. looks liek there is room, then if you can have someone weld a sheet of sheet from the bumper to signal... and paint it the factory color if you can... also the front fenders look like they need to be cut... go for it!... haha as i can see there is a bumperless kj in your pics... steal your buddies bumper??? That was the test mule

LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/

Front bumper interest http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=48646	Page 1 of 2

Author:	rav [ Mon Dec 21, 2009 11:22 pm ]
Post subject:	Re: Front bumper interest
If you could build a ARB type bull bar like it is on the on the cherokee, I would be very interested. I used to love the ARB on my 88XJ, How i wish i still had the XJ

Author:	RPM007 [ Mon Dec 21, 2009 11:40 pm ]
Post subject:	Re: Front bumper interest
Very cool, Rock Lizard. I would like to see a tubular grill guard added above the winch mount. I will be adding one of those badboys to my KK wish list.

Author:	Diggerfreek [ Tue Dec 22, 2009 12:03 am ]
Post subject:	Re: Front bumper interest
Told ya people wanted a bumper Marty

Author:	Scar0 [ Tue Dec 22, 2009 1:46 am ]
Post subject:	Re: Front bumper interest
Could you adapt it for the Nitro? As it is, it looks like the KJ one might bolt right on there, if you leave the turn signal brackets off!?

Author:	Inc [ Tue Dec 22, 2009 2:05 am ]
Post subject:	Re: Front bumper interest
I think the straighter and sharper lines of this bumper will look better on the KK. The KJ has too many curves and round edges for all the straight edges of the bumper. Maybe if the edges were slightly softened like the SC Rockstar. Still, good to see it finally out.

Author:	Scar0 [ Tue Dec 22, 2009 3:21 am ]
Post subject:	Re: Front bumper interest
Here is a Photo Mock up I did for the KA using the KJ bumper. What do you think? Original Pic.

Author:	Diggerfreek [ Tue Dec 22, 2009 3:42 am ]
Post subject:	Re: Front bumper interest
I like your skills Mark! Can you leave the upper bumper pieces in place?

Author:	Scar0 [ Tue Dec 22, 2009 3:45 am ]
Post subject:	Re: Front bumper interest
Diggerfreek wrote: I like your skills Mark! Can you leave the upper bumper pieces in place? LOL it is amazing what you can do with MS paint! Not sure about the upper bumper pieces, I have not had mine off yet. Let me check the FSM... Edit: Nope they are part of the fascia.

Author:	Diggerfreek [ Tue Dec 22, 2009 3:48 am ]
Post subject:	Re: Front bumper interest
Scar0 wrote: Diggerfreek wrote: I like your skills Mark! Can you leave the upper bumper pieces in place? LOL it is amazing what you can do with MS paint! Not sure about the upper bumper pieces, I have not had mine off yet. Let me check the FSM... Come on! You haven't popped that front bumper off yet! Mine comes off as fast as the clothes on a $7 dollar Never mind

Page 1 of 2	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/

Author:	Scar0 [ Tue Dec 22, 2009 3:52 am ]
Post subject:	Re: Front bumper interest
Nope. Had the Bra, uh, grill off several times. Never got to her pants, uh, bumper though. I went out and checked. Nope for sure, it is part of the bumper fascia.

Author:	Scar0 [ Tue Dec 22, 2009 3:58 am ]
Post subject:	Re: Front bumper interest
Too bad I'm not closer... I might have to break out the welder myself. Maybe?

Author:	Diggerfreek [ Tue Dec 22, 2009 4:03 am ]
Post subject:	Re: Front bumper interest
Scar0 wrote: :ROTFL: Nope. Had the Bra, uh, grill off several times. Never got to her pants, uh, bumper though. I went out and checked. Nope for sure, it is part of the bumper fascia.

Author:	Scar0 [ Tue Dec 22, 2009 4:07 am ]
Post subject:	Re: Front bumper interest
OK how did my post get ahead of yours?

Author:	Diggerfreek [ Tue Dec 22, 2009 4:12 am ]
Post subject:	Re: Front bumper interest
Scar0 wrote: OK how did my post get ahead of yours? Crap! Here we go again

Author:	Scar0 [ Tue Dec 22, 2009 4:17 am ]
Post subject:	Re: Front bumper interest
Diggerfreek wrote: Scar0 wrote: OK how did my post get ahead of yours? Crap! Here we go again LOL and what is with the, clicking on submit and it just brings you back to the thread, with no post being posted? Then I hit back, and hit preview and, then hit submit and it posted 2 times. Or you hit submit and it takes you back to the thread with no post. Exit the thread, open it back up, then it will submit a reply post just fine. Why don't the little Pics work in the quotes?