the tires you listed are 31.6 and 31.7 inch diameters... the 265/75 is wider actually then the 235/85... that might lead to rubbing when you cut the wheel with the spacers... i'm no tire expert tho so just adding my
here
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Taco tires/rims http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=50340 |
Page 1 of 1 |
| Author: | E2 [ Fri Feb 19, 2010 1:19 am ] |
| Post subject: | Taco tires/rims |
Okay so any one put start to think about changing to a 15" rim with a offset to push the rim/tires slightly outwards for better stance? |
|
| Author: | Jeepin_it_real [ Fri Feb 19, 2010 1:36 am ] |
| Post subject: | Re: Taco tires/rims |
wont work... 16 in is smallest |
|
| Author: | E2 [ Fri Feb 19, 2010 1:51 am ] |
| Post subject: | Re: Taco tires/rims |
If this is the case then makes no sense to change out rims, but just add some spacers or will that cause more rubbing for either 265/75r16 or 235/85r16 ? |
|
| Author: | Jeepin_it_real [ Fri Feb 19, 2010 2:13 am ] |
| Post subject: | Re: Taco tires/rims |
the tires you listed are 31.6 and 31.7 inch diameters... the 265/75 is wider actually then the 235/85... that might lead to rubbing when you cut the wheel with the spacers... i'm no tire expert tho so just adding my here
|
|
| Author: | DirtyKK [ Fri Feb 19, 2010 3:20 am ] |
| Post subject: | Re: Taco tires/rims |
You shouldnt go too wide of a stance or you'll risk rubbing tires on the lip of the fender. I have 265s on a 16x8 with I believe 5" offset and the rim sits flush with the fenders and when stuffed tuck nicely. |
|
| Author: | nightdrv [ Sat Mar 06, 2010 5:50 pm ] |
| Post subject: | Re: Taco tires/rims |
I am putting together a set of Toyota rims, but they're 16" steelies. 4 more left to find....... 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|