| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Rear end boost http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=50739 |
Page 1 of 1 |
| Author: | clacker [ Thu Mar 04, 2010 9:16 pm ] |
| Post subject: | Rear end boost |
2 questions: how much worth of lift is possible with read copil isolators?(i know its small, but im only lookin for maybe 1" total), and second... does anyone know if u can buy just a pair of the urethane spacers thats are used in the rear lift kit that daystar, rusty's, or rock krawler uses? Or maybe someone in here has a budget spacer lift they are selling and would b willing to sell me the rear spacers? |
|
| Author: | E2 [ Fri Mar 05, 2010 4:01 am ] |
| Post subject: | Re: Rear end boost |
Talk to JBA I'm sure they have a spacer for the rear, but an inch that may be asking for to much. |
|
| Author: | DirtyKK [ Fri Mar 05, 2010 4:11 am ] |
| Post subject: | Re: Rear end boost |
you could stack some extra iso pads. top and bottom iso pads are the same. i would put an extra on top and one on bottom and you could gain pry about 3/4 of an inch |
|
| Author: | E2 [ Fri Mar 05, 2010 4:22 am ] |
| Post subject: | Re: Rear end boost |
http://jeepinbyal.com/prod-Rear_coil_spring_isolator-705.aspx |
|
| Author: | Diggerfreek [ Fri Mar 05, 2010 4:38 am ] |
| Post subject: | Re: Rear end boost |
Here sure got those up quick after talking to me |
|
| Author: | clacker [ Fri Mar 05, 2010 4:00 pm ] |
| Post subject: | Re: Rear end boost |
well, i found a pair of 2" urethane spacers for the front OR rear of a XJ, WJ, and TJ for tlike 25$. Im thinkin these will fit the rear coils on the KK and then ill just be able to cut them down to the size i need |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|