LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Installing Mopar after market cruise control
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=52127		 Page 1 of 1
Author:  Tittiez [ Fri Apr 23, 2010 8:14 pm ]
Post subject:  Installing Mopar after market cruise control
Hey all, I just bought the Mopar after market speed control kit for my '08 Sport 4x4, and was just curious if anyone else has attempted this operation. It looks fairly simple, just wondering if anyone has any out of the ordinary experiences. Thanks!
Author:  Diggerfreek [ Sat Apr 24, 2010 1:35 am ]
Post subject:  Re: Installing Mopar after market cruise control
I don't know of any one on here that has installed cruise control secondary..
Author:  Tittiez [ Sat Apr 24, 2010 3:21 am ]
Post subject:  Re: Installing Mopar after market cruise control
Already got it done. Took me a grand total of 20 minutes, works perfectly :mrgreen:
Author:  Diggerfreek [ Sat Apr 24, 2010 3:34 am ]
Post subject:  Re: Installing Mopar after market cruise control
Tittiez wrote:
Already got it done. Took me a grand total of 20 minutes, works perfectly :mrgreen:

Wow, that must have been real hard. Probably took you longer to clean up then it did to do the install right? :lol:

Thanks for the reply!
Author:  Tittiez [ Sat Apr 24, 2010 4:25 am ]
Post subject:  Re: Installing Mopar after market cruise control
Diggerfreek wrote:
Tittiez wrote:
Already got it done. Took me a grand total of 20 minutes, works perfectly :mrgreen:

Wow, that must have been real hard. Probably took you longer to clean up then it did to do the install right? :lol:

Thanks for the reply!


Haha exactly :) Next project is a Bully Bar I'm thinking...
Author:  Diggerfreek [ Sat Apr 24, 2010 4:47 am ]
Post subject:  Re: Installing Mopar after market cruise control
Bull bars are nice because they offer a great place to mount aux lights, but you will loose your front tow hooks if you have them and the bull bar can not be used as a recovery point..
Author:  Jeepin_it_real [ Sat Apr 24, 2010 5:34 pm ]
Post subject:  Re: Installing Mopar after market cruise control
ya know digger i was thinking... everyone fabs up bumpers and stuff.. how about a steel bull bar with recovery points built in... possible?
Author:  Diggerfreek [ Sat Apr 24, 2010 5:39 pm ]
Post subject:  Re: Installing Mopar after market cruise control
Jeepin_it_real wrote:
ya know digger i was thinking... everyone fabs up bumpers and stuff.. how about a steel bull bar with recovery points built in... possible?



It could be done, but because of how "smart" people are, it will never happen. Reason being is some one would try and recover from the wrong spot on the bar causing it to fail or causing the front cross member to fail because of lateral forces being applied in the wrong direction.....
Author:  Jeepin_it_real [ Sat Apr 24, 2010 6:14 pm ]
Post subject:  Re: Installing Mopar after market cruise control
well my thought would be use a 3 inch tube... bend it up and close to the bttom where the hooks would do... have a place for the hooks to mount.... realisitcally if you produced the bullbar with a tab you could mount the bar and the hooks on top of the tab.... but again im no professional so that might now work
Author:  SETexasLibby [ Sat Apr 24, 2010 10:40 pm ]
Post subject:  Re: Installing Mopar after market cruise control
Tittiez wrote:
Hey all, I just bought the Mopar after market speed control kit for my '08 Sport 4x4, and was just curious if anyone else has attempted this operation. It looks fairly simple, just wondering if anyone has any out of the ordinary experiences. Thanks!


Please do a HOW TO, i've been pondering doing it on the old ladies Libby
Author:  Scar0 [ Sun Apr 25, 2010 3:37 am ]
Post subject:  Re: Installing Mopar after market cruise control
Tittiez wrote:
Already got it done. Took me a grand total of 20 minutes, works perfectly :mrgreen:

Which one did you get? If you don't mind me asking?
Author:  talleybird_kk [ Sun Apr 25, 2010 11:32 pm ]
Post subject:  Re: Installing Mopar after market cruise control
Installed mine in abour 40 minutes...works great.
Author:  tommudd [ Mon Apr 26, 2010 9:32 am ]
Post subject:  Re: Installing Mopar after market cruise control
If its anything like the KJ super simple, installed one about a month ago, took longer to open the hood then install it almost. Kit comes from Chrysler with instructions, plug and cruise simple as that
Author:  Tittiez [ Tue Apr 27, 2010 8:45 pm ]
Post subject:  Re: Installing Mopar after market cruise control
Scar0 wrote:
Tittiez wrote:
Already got it done. Took me a grand total of 20 minutes, works perfectly :mrgreen:

Which one did you get? If you don't mind me asking?


I got the Mopar brand, bought it off http://www.justforjeeps.com/spcokit.html for about $220. The hardest part is just popping the airbag out, you just have to find the three hooks that hold it onto the steering wheel, here's a picture of it:

Image

The little black tab is hooked on an aluminum anchor that's on the steering wheel. To get it off, all you have to do is use a small flat head screwdriver and push it toward the outside of the steering wheel. It was a little tricky to get the hang of it on the first hook, but after that it was cake.

There are three anchors, you can reach them behind the steering wheel when it is in these three positions:

Image
Image
Image

Then once the airbag isn't anchored, you can just pull it out and unplug the two plugs in the back end. Then you just have to undo the 13mm bolt holding the steering wheel on, and kinda shimmy the old steering wheel off. Then you just throw the new steering wheel they send back on, tighten the center bolt to 25 ft-lbs, and plug everything back in. The new cruise looks like this:

Image

Overall, it was very easy, just plug and play. Although, I have heard several warnings to disconnect the battery ten minutes prior to messing with the airbag in order to avoid any chance of it accidentally going off while you're working on it. Sorry about the pics, I forgot to take them in the process!
Author:  Tittiez [ Tue Apr 27, 2010 8:47 pm ]
Post subject:  Re: Installing Mopar after market cruise control
Jeepin_it_real wrote:
well my thought would be use a 3 inch tube... bend it up and close to the bttom where the hooks would do... have a place for the hooks to mount.... realisitcally if you produced the bullbar with a tab you could mount the bar and the hooks on top of the tab.... but again im no professional so that might now work


I know I'd definitely buy if it was available :)
Author:  Scar0 [ Wed Apr 28, 2010 4:17 am ]
Post subject:  Re: Installing Mopar after market cruise control
Thanks for the reply and link Tittiez!
And yes about the air bag and taking the Neg battery cable off 10 minutes ahead of time.
A N***o owner just popped off his side bags, because he forgot to do this. :banghead:
Author:  Tittiez [ Wed Apr 28, 2010 5:44 am ]
Post subject:  Re: Installing Mopar after market cruise control
Scar0 wrote:
Thanks for the reply and link Tittiez!
And yes about the air bag and taking the Neg battery cable off 10 minutes ahead of time.
A N***o owner just popped off his side bags, because he forgot to do this. :banghead:


Ouch! That'd suck! Heh sorry about the pics, they're fixed now. Work computers suck...
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/