| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Factory side rails http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=53725 |
Page 1 of 1 |
| Author: | Tittiez [ Wed Jun 23, 2010 4:57 am ] |
| Post subject: | Factory side rails |
Ok, I was just curious if anyone who had put on an aftermarket roof rack took off their factory side rails? For some reason, my KK came with those useless rails that they put on the SkySlider roofs, and I need some that will hold a ski rack for winter!  I can't find them for purchase anywhere short of going to the stealership... |
|
| Author: | Rulez [ Wed Jun 23, 2010 10:38 pm ] |
| Post subject: | Re: Factory side rails |
I have rro side rails on the skyslider. You can bolt anything to those. |
|
| Author: | ericw08 [ Thu Sep 16, 2010 9:15 am ] |
| Post subject: | Re: Factory side rails |
I know this is an old thread but we haven't missed ski/ride season yet... I think this is what you're looking for: http://www.justforjeeps.com/prstsira.html The price doesn't seem too out of line from what I would expect. |
|
| Author: | At The Helm [ Thu Sep 16, 2010 1:15 pm ] |
| Post subject: | Re: Factory side rails |
You could fab your own or draw up plans for a welding shop. Here is a how to write up for cross bars. You would probably have to bend steeper angles for the skyslider though. http://www.jeepkj.com/forum/showthread.php?t=41243 |
|
| Author: | Tittiez [ Thu Sep 16, 2010 8:03 pm ] |
| Post subject: | Re: Factory side rails |
ericw08 wrote: I know this is an old thread but we haven't missed ski/ride season yet... I think this is what you're looking for: http://www.justforjeeps.com/prstsira.html The price doesn't seem too out of line from what I would expect. Yeah that's exactly it, I found that website a little while ago, I just need to order these up. Atthehelm wrote: You could fab your own or draw up plans for a welding shop. Here is a how to write up for cross bars. You would probably have to bend steeper angles for the skyslider though. http://www.jeepkj.com/forum/showthread.php?t=41243 I think this could definitely be viable too. I might just fab my own, there's only those four studs to worry about. Thanks for the replies! |
|
| Author: | At The Helm [ Thu Sep 16, 2010 8:45 pm ] |
| Post subject: | Re: Factory side rails |
Just drill holes straight through and use bolts and lock nuts. 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|